NETGEAR WG602 V2 manual Hardware Description, WG602 v2 Wireless Access Point Front Panel

Reference Manual for the WG602 v2 54 Mbps Wireless Access Point

Hardware Description

The 54 Mbps Wireless Access Point WG602 v2 front and rear hardware functions are described below.

WG602 v2 Wireless Access Point Front Panel

The WG602 v2 Access Point provides three status LEDs.

Power Ethernet Wireless

Figure 2-1: WG602 v2 front panel

The following table explains the LED indicators:

LED	DESCRIPTION
Power	Power Indicator
Off	No power If this LED does not come on with the power adapter and cord correctly
	installed, see Chapter 6, “Troubleshooting.”
On	Power is on
Ethernet	Ethernet LAN Link Activity Indicator
Off	Indicates no Ethernet link detected.
Green On	100 Mbps Fast Ethernet link detected, no activity.
Green Blink	Indicates data traffic on the 100Mbps Ethernet LAN.
Amber 0n	10 Mbps Ethernet link detected, no activity.
Amber Blink	Indicates data traffic on the 10Mbps Ethernet LAN.
Wireless	Wireless LAN Link Activity Indicator
Off	Indicates no wireless link detected
Green On	Wireless link enabled, no activity.
Green Blink	Wireless link activity

Introduction

2-5

M-10181-03