Novatel DL-V3 Groupecutoff Edit Group Elevation Cut-Off Angle, Groupecutoff Default Configuration

B.17 GROUPECUTOFF Edit Group Elevation Cut-Off Angle

The groupecutoff command allows you to edit the elevation cut-off angle configuration for the group.

groupecutoff set sets cut-off for the group named groupname to ecutoff. groupecutoff clear removes the cut-off setting from the group named groupname. groupecutoff default sets the elevation cut-off for the group to 0 degrees.

Syntax

groupecutoff set groupname [ecutoff]

groupecutoff defaultclear groupname

B.17.1 Groupuse Translation

groupuse start

If set, the ecutoff command is issued.

groupuse stop

N/A

Message ID = 56

Field	Data	Value Used if	Bytes	Format	Units	Offset
		Not
		Specified
1	Header	-		-	-	0
2	Parameter Update, see Table 33 on	-	4	Enum	none	H
	Page 106
3	Group name	-	12	Char[]	none	H+4
4	Elevation cutoff	0	4	Float	none	H+16

Table 34: Parameter Update

Binary Value	ASCII Value	Description
0	DEFAULT	Set the parameter for a group to the default
1	SET	Set the parameter for a group
2	CLEAR	Clear the parameter from a group

Table 35: GROUPECUTOFF Default Configuration

Parameter	Power-On		Freset	Stored in NVM
ecutoff	no change	0		YES

DL-V3 User Manual Rev 3 107