5.Press 
or 
to highlight AUTO or MAN- UAL, then press SET.
| CHANNEL PRESET |
| |||
| AIR/CATV |
| AIR | CATV | |
|
|
|
|
|
|
| CATV | NORMAL | HRC | IRC | |
|
|
|
| ||
| CH SET | AUTO | MANUAL | ||
SELECT :
CHANGE:
ENTER :SET EXIT :MENU
AUTO — The VCR’s tuner automatically scans through the channels (TV or CATV) and memorizes the active channels in your area. AUTOMAT- TUN- PLEAS WAI and the current channel number appear on the TV screen, and CH and the current channel appear on the VCR’s display. After scanning all the channels, the tuner stops on the
MANUAL — ADD or ERASE and the cur- rent channel appear on the upper right cor- ner of the TV screen.
a. To change the channels one at a time (higher or lower), press 
or 
.
To directly select channels, use the re- mote control’s number buttons. See “Selecting Channels” on Page 25.
b.To add the channel to memory, press 
or 
so ADD appears to the left of the selected channel.
To delete the channel from memory, press 
or 
so DELETE appears to the left of the selected channel.
c.Repeat Steps a and b until you store all the channels you want.
Notes:
•You can repeatedly press 
or 
to review the stored channels.
24
•While you manually set a channel, the TV screen turns green and does not show the received broadcast sig- nals.
Adding/Erasing Channels
You can add a channel that is not already stored, or erase an unwanted stored channel.
1.Press MENU to display the main menu.
2.Press 
twice to highlight CHANNEL PRESET, then press SET. The channel pre- set menu appears on the TV screen.
3.Press 
to highlight CH SET.
4.Press 
or 
to highlight MANUAL, then press SET.
5.Repeatedly press 
or 
(or use the num- ber keys) so the channel number you want appears on the display.
Notes:
•Precede a
— for example, 01, 02, etc.
•To enter a
6.Repeatedly press 
or 
so ADD or ERASE appears in the upper right corner of the TV screen, then press SET.
ADD 03
CHANNEL SELECT | : |
ADD/ERASE:
EXIT :MENU
7. Press MENU to return to the normal screen.
