Status Batt(ery) Screens
STATUS/FX/PAGE | Pressing the <BATT> soft key brings up the first BATT screen. |
| |
choose category: | Pressing the <DOWN> soft key brings up successive BATT screens. |
| |
MODES METER BATT PG2 |
|
P00 | STATUS/FX/MODE | P00 | P00 | |||||||
battery | 27.8 vdc | battery |
|
| 27.8 vdc | absorb |
|
| 28.8 vdc | |
actual |
|
| temp compensated |
| setpoint |
|
|
| ||
DOWN | STATUS | PORT | DOWN | UP | TOP | PORT | DOWN | UP | TOP | PORT |
P00 | P00 | P00 | ||||||
absorb |
| 00.0 hrs | float |
| 13.6 vdc | float |
| 24.0 hrs |
time remaining |
| setpoint |
|
| time remaining |
| ||
DOWN | UP | TOP PORT | DOWN | UP | TOP PORT | DOWN | UP | TOP PORT |
P00 | P00 | P00 | ||||||
refloat |
| 12.5 vdc | equalize |
| 14.4 vdc | equalize |
| 00.0 hrs |
setpoint |
|
| setpoint |
|
| time remaining |
| |
DOWN | UP | TOP PORT | DOWN | UP | TOP PORT | DOWN | UP | TOP PORT |
P00 | |||
batt temp. |
|
| 255 |
(not in degree C/F) |
| ||
DOWN | UP | TOP | PORT |
Push <TOP> to return to the | |
end of battery menu | |
| first METER screen. |
UP TOP STATUS
Push <STATUS> to return
to the “choose category”
STATUS screen.
BATT(ERY) Screens
•battery actual: battery voltage as measured by the Inverter
•battery temp compensated: not active in the
•absorb set point: charger set point for absorb recharging cycle
•absorb time remaining: time remaining in absorb recharging cycle
•float set point: battery set point for float recharging cycle
•refloat set point: at this battery voltage, the charger restarts the float recharging cycle
•equalize set point: charger set point for equalize recharging cycle
•equalize time remaining: time remaining in equalize recharging cycle
•batt temp: not active in the
The BATT MODE values cannot be changed in the STATUS screens.
28
