Palm PDA CentroTM Smart Device manual Making a PTT call

KEY TERM

6

Y O U R P U S H T O T A L K A P P L I C A T I O N

C H A P T E R

Making a PTT call

1Press the Side button to go to PTT.

2Check the box next to up to seven contacts or highlight the group you want to call.

TIP You can jump to a particular contact or group by entering the first few letters of the contact or group name.

3Hold your Centro a few inches from your mouth, as you would hold a walkie-talkie.

4Press and hold the Side button.

5Wait for the tone that signals when you can begin to speak.

6When you’ve finished speaking, release the Side button.

When you release the Side button, a tone signals the person(s) on the other end that you’ve finished talking and the next person can begin to speak.

NOTE When you make a PTT call, the speakerphone is on by default when the Ringer switch is set to Sound On. If your Ringer switch is set to Sound Off, the PTT call goes to the earpiece.

When a tone signals you that the other person has finished speaking, you can press and hold the Side button again to continue the conversation.

7Press Power/End to hang up.

DID YOU KNOW? If a PTT call remains inactive for more than 30 seconds, the call ends automatically.

Quick Group A selection of multiple contacts that you make to form an ad hoc group for a single call. The contacts in a Quick Group must have a status of Available or Silent. If a contact’s status is DND or Logged Out, you cannot include that contact in a Quick Group.

140 M A K I N G C A L L S