Panasonic DP-6010, DP-3510 manual Operation Chart, Common Features and Usage

Operation Chart

Common Features and Usage

■Basic Operation

Original

Load Paper

Turn the Power

Switch On

Turn the main Power Switch On (Located on the back of the Copier)

1

Place the Original(s) (Up to 70/i-ADF)

B4·FLS

2	3	4	5
Press the	COPY SIZE	Number	Press
COPY Key	(Reduction/	of Copies	START
	Enlargement Only)

■Position of the Original

From i-ADF	From Platen
	Original Guide

CPlace originals face down on the

platen or face up on the i-ADF.

CIf the original is not positioned

i-ADF Tray

Original Guides

Adjust to the original’s width

A5

A5 R

A4 A4 R

FLS B4

A3

properly, a portion of the original

may not be copied.

CFor originals smaller than A5 size,

position the original within the A5

area and select A5.

■Commonly Used Functions and Operating Procedures

Full Size

Makes a copy that is the same						(See page 16)
	1	2	4	5
size as the original
Reduction or Enlargement
Copies the original at a fixed
	1	2	3		4 5 (See page 18)
reduction or enlargement ratio

■Memory Capacity

If the memory becomes full during original scanning, the message “Cannot Complete / Job Exceeds Memory Capacity” will be displayed on the LCD. If this occurs, follow the instructions on the LCD.

When additional memory is required, consult with an authorised servicing dealer.

NOTE	CIf the fusing temperature drops excessively on the DP-4510/6010 during a multi-copy
	cycle, there is a remote possibility that the copying speed will be reduced. The copying
	speed will automatically return to normal when the fusing temperature rises enough to
	ensure good fusing performance.

4