Panasonic HDC-HS60P/PC Copying between SD card and Built-in Memory, Change the mode to

Copy/Dubbing

With this unit/other	1	Copying between SD card and Built-in Memory/
products		HDD [HDC-TM55/HDC-TM60/HDC-HS60]

Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory/HDD.

∫Confirming remaining capacity on the copy destination

[MEDIA STATUS] (l 49) allows you to confirm how much capacity remains on the SD card, built-in memory or HDD.

≥If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards following the instruction on the screen.

In this case, the last scene copied to an SD card is automatically divided to fit the space on the SD card.

≥If you divide the scenes (l 88), and copy by scene selection, it is possible to copy matching the remaining capacity of the media, or only the necessary parts.

Copying

≥If there is not much remaining capacity in the SD card, a confirmation message asking to copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.

≥Refer to page 100 for approximate time for copying.

1 Change the mode to .

≥Use a sufficiently charged battery or the AC adaptor.

2 Select the menu.

MENU : [COPY]

		/
[	]		When copying from the built-in memory to the SD card
[	]		When copying from the SD card to the built-in memory

≥When there are relay-recorded scenes in the built-in memory, a message appears on the screen. Touch [YES] and copy after combining relay recorded scenes to the SD card. (l 92)

[	]	When copying from the HDD to the SD card
[	]	When copying from the SD card to the HDD

99

VQT2M51