Philips DS3800W/10 user manual Connect to your home Wi- Fi network for AirPlay

4Connect to your home Wi- Fi network for AirPlay

To connect DS3800W to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to DS3800W.

You can do this in two ways (depending on which type of Wi-Fi router you use):

Automatically - if your Wi-Fi router is WPS (Wi-Fi Protected Setup)-enabled and supports PBC (Push Button Connection) (see ‘Scenario 1: Connect to a WPS router’ on page 11)

Manually - if your Wi-Fi router does not support WPS (see ‘Scenario 2: Connect to a non-WPS router’ on page 12)

Once connected successfully, DS3800W will remember your home Wi-Fi settings.Then you can enjoy AirPlay whenever DS3800W is powered on and connected to your home Wi- Fi network automatically.

Before connection of DS3800W to you home Wi-Fi network, check the points below.

1 Make sure that your Wi-Fi router is English

powered on and working properly.

2Make sure that DS3800W has been powered on and booted up successfully (see ‘Turn DS3800W on’ on page 10).

3Identify the type of your Wi-Fi router (see the user manual of your Wi-Fi router for details).

Scenario 1: Connect to a WPS router

Note

Before you press any button on DS3800W, make sure that DS3800W has been booted up successfully (see ‘Turn DS3800W on’ on page 10).

1Press the WPS button on your home Wi-Fi router.

WPS

EN 11