Philips HQ912, HQ914 manual Storage, Replacement

English

1Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver.

2Press the release button and pull the shaving unit off the shaver (Fig. 10).

3Turn the orange wheel anticlockwise (1) and remove the retaining frame (2) (Fig. 14).

4Remove the shaving heads from the shaving unit one by one (Fig. 15).

Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.

5Remove the guard from the cutter (Fig. 16).

6Clean the cutter with the short-bristled side of the brush. Brush carefully in the direction of the arrows (Fig. 17).

7Clean the guard with the brush (Fig. 18).

8Put the shaving heads back into the shaving unit.

English

9Put the retaining frame back into the shaving unit and turn the orange wheel clockwise.

10Put the shaving unit back onto the shaver.

Storage

-- Put the protection cap on the shaver after use to prevent damage to the shaving heads (Fig. 8).

Note: Make sure that the lug of the protection cap covers the release button.

Replacement

Replace the shaving heads every two years for optimal shaving results.

Replace damaged or worn shaving heads with Philips HQ55 shaving heads.

For instructions on how to remove the shaving heads, see section ‘Every two months: shaving heads’ in chapter ‘Cleaning’.

21 22