CN5: Output Terminal for Panel Connector
Pin No. | Symbol | Function |
1 | PANEL_VCC | 3.3 Power supply |
2 | PANEL_VCC | 3.3 Power supply |
3 | PANEL_VCC | 3.3 Power supply |
4 | LVDS_SET | LVDS_SET |
5 | GND | Ground |
6 | GND | Ground |
7 | RXE0‐ | Receiver signal (‐) |
8 | VDD_EDID | VCC 3.3V |
9 | RXE0+ | Receiver signal (+) |
10 | GND | Ground |
11 | RXE1‐ | Receiver signal (‐) |
12 | CLK_EDID | CLK_EDID |
13 | RXE1+ | Receiver signal (+) |
14 | DATA_EDID | DATA_EDID |
15 | RXE2‐ | Receiver signal (‐) |
16 | GND | Ground |
17 | RXE2+ | Receiver signal (+) |
18 | VDIM | Adjust back‐light |
19 | RXEC‐ | Clock signal (‐) |
20 | BL ON | Black‐light on/off |
21 | RXC+ | Clock signal (+) |
22 | GND | Ground |
23 | RXE3‐ | Receiver signal (‐) |
24 | Black‐light VCC 12V | VCC 12V for back‐light device |
25 | RXE3+ | Receiver signal (+) |
26 | Black‐light VCC 12V | VCC 12V for back‐light device |
27 | GND | Ground |
28 | Black‐light VCC 12V | VCC 12V for back‐light device |
29 | GND | Ground |
30 | Black‐light VCC 12V | VCC 12V for back‐light device |
SW board
JP1: Output Terminal for OSD, Power and Brightness control.
| Symbol | Function |
1 | POWER | For POWER on/off |
2 | LED‐GRN | Normal Mode: Low |
|
|
|
3 | LED‐ORG | Save Mode: Low |
4 | ADJUST / + | For OSD Adjustment |
|
|
|
5 | ADJUST / ‐ | For OSD Adjustment |
6 | SELECT | For OSD Adjustment |
7 | MENU | For OSD Adjustment |
8 | GND | Ground |
|
|
|
LT1201 User Manual | 10 |
