Polycom 1725-11530-200 Rev A1 manual Reset to Factory Defaults, Ethernet Menu

Administrator’s Guide - SoundPoint® IP / SoundStation® IPInstallation and Operation

Name	Possible Values	Description
Provisioning	any string	The URL used in XML post/response transac-
Stringb		tions. If empty, the configured URL is used.
		This field is disabled when Provisioning Method
		is Default.

a.The server user name and password should be changed from the default values. Note that for insecure protocols the user chosen should have very few privileges on the server.

b.Not available on SoundPoint® IP 300 and SoundPoint® IP 500 phones.

2.2.1.3.4Ethernet Menu

Name	Possible Values	Description
CDP	Enabled, Disabled	If enabled, the phone will use CDP. It also reports
		power usage to the switch.
VLAN ID	Null, 0 through 4094	Phone’s 802.1Q VLAN identifier.
		Note: Null = no VLAN tagging
LANa	Auto, 10HD, 10FD,	The network speed over the Ethernet.
	100HD, 100FD	The default value is Auto.
PCa	Auto, 10HD, 10FD,	The network speed over the Ethernet.
	100HD, 100FD	The default value is Auto.

a.Only available on SoundPoint® IP 430 and 601 phones. HD means half duplex and FD means full duplex.

2.2.1.4Reset to Factory Defaults

The basic network configuration referred to in the preceding sections can be reset to factory defaults.

To perform this function, do one of the following during the countdown process in the bootROM:

•On all phones except the IP 430 and 4000, simultaneously press and hold the 4, 6, 8 and * dial pad keys until the password prompt appears.

•On the IP 430, simultaneously press and hold the 1, 3, 5 and 7 dial pad keys until the password prompt appears.

•On the IP 4000, simultaneously press and hold the 6, 8 and * dial pad keys until the password prompt appears.

Enter the administrator password to initiate the reset. Resetting to factory defaults will also reset the administrator password (factory default password is 456).

12 Copyright © 2006 Polycom, Inc.