| SpectraLink Corporation | Configuration and |
| |
|
| NetLink Telephony Gateway and SpectraLink Radio Protocol |
| |
|
|
|
|
|
| Message | Description | Action |
|
|
|
|
|
|
| Files too big | Handset software download files are | Download new software from the SpectraLink |
|
|
| incorrect or corrupted. | site per section 8 Software Maintenance. |
|
|
|
|
|
|
| Flash config error | Handset internal configuration is corrupt. | Perform "Restore Defaults" operation via |
|
|
|
| administrator menus [or reprogram with |
|
|
|
| Configuration Cradle]. |
|
|
|
|
|
|
| Initializing … | The handset is performing power on | None. This is informational only. |
|
|
| initialization. |
|
|
|
|
|
|
|
| Internal Err. # # | The handset has detected a fault from | Record the error code so it can be reported. |
|
|
| which it cannot recover. | Turn the handset off then on again. |
|
|
| OE = Error while writing the Flash (return | If error persists, try registering a different |
|
|
| handset to this telephone port. |
| |
|
| handset to factory). |
| |
|
| If error still persists, contact SpectraLink |
| |
|
|
|
| |
|
| OF = No functional code (contact | Technical Support and report the error. |
|
|
| SpectraLink Technical Support). |
|
|
|
|
|
|
|
| Multiple GW Reg | y…y = Gateway IP address | Check each NetLink Telephony Gateway for |
|
| yyy.yyy.yyy.yyy | Handset received responses from | the handset’s MAC address on the Telephone |
|
|
| multiple gateways; displays IP address of | Line Configuration screen. Delete any |
|
|
| one responding gateway. | duplicate entries leaving only one entry on the |
|
|
|
| correct Telephone Gateway and port for this |
|
|
|
| handset. |
|
|
|
|
|
|
| Must Upgrade SW! | Handset software is incompatible with | Download new software from the SpectraLink |
|
|
| hardware. | site per section 8 Software Maintenance. |
|
|
|
|
|
|
| Net Busy | x…x = AP MAC address | Try the call again later. |
|
| xxxxxxxxxxxx | Handset cannot obtain sufficient |
|
|
|
| bandwidth to support a call; displays |
|
|
|
| MAC of failing AP. |
|
|
|
|
|
|
|
| No DHCP Server | Handset is unable to contact the DHCP | Check that DNCP is operational and |
|
|
| server. | connected to WLAN or use Static IP |
|
|
|
| configuration in the handset. |
|
|
|
|
|
|
| No ESSID | Attempted to run site survey application | Let handset come completely up. |
|
|
| without an ESSID set. | Statically configure an ESSID in the Admin |
|
|
|
| menu. |
|
|
|
|
|
|
| No Func Code | Handset software download files are | Reconfigure the handset to gain access to the |
|
|
| incorrect or corrupted. | WLAN and download new code. |
|
|
|
|
|
|
| No GW Response | y…y = Gateway IP address | Verify that the NetLink Telephony Gateway is |
|
| yyy.yyy.yyy.yyy | Handset has lost contact with the NetLink | properly configured. |
|
|
| Telephony Gateway. |
|
|
|
| Handset cannot find an NetLink |
|
|
|
| Telephony Gateway. |
|
|
|
| Handset not registered on NetLink |
|
|
|
| Telephony Gateway. |
|
|
|
|
|
|
|
|
| NetLink Telephony Gateway is not | Verify that the NetLink Telephony Gateway is |
|
|
| working | powered on. If so, follow standard NetLink |
|
|
|
| Telephony Gateway troubleshooting |
|
|
|
| procedures. |
|
|
| No LAN connection at the AP or NetLink | Verify NetLink Telephony Gateway connection |
|
|
| Telephony Gateway. | to LAN and all APs. |
|
|
|
|
|
|
PN: | Page 43 |
