Pride Mobility Outlander LP, Outlander DE Manual Lift System Operation, Power Chair Hold-down Bar

I V . O P E R A T I O N

4.Raise the lift platform by turning and holding the key in the counterclockwise direction. See figure 13. Continue to raise the lift until the motor stops, then release the key.

NOTE: As the lift platform rises, the automatic lock-down arm activates to secure the scooter to the lift platform. You may need to adjust the scooter’s tiller position to prevent interference with the smooth operation of the automatic lock-down arm.

NOTE: The motor will stop automatically at the top of its stroke and will emit a clicking sound. Release the key upon hearing this sound.

NOTE: Pay attention to the path of the lift platform during operation. Make sure the lift does not rub against or interfere with the vehicle in any way. If you notice any contact between the lift platform and the vehicle, stop lift operation immediately and contact your authorized Pride Provider for assistance.

NOTE: The Outlander LP is the only model that provides a hold-down bar to secure power chair prod- ucts during transport as a standard feature. See figure 18.

Follow these steps to remove a mobility device from the lift system:

1.Lower the lift platform to the ground.

2.Unfasten the tie-down straps or allow the lock-down arm to automatically return to the vertical position.

Unlock and loosen the tie-down straps.

Rotate the adjustment lever only on each strap forward and rearward in a ratcheting motion until each strap reaches its original furled position.

3. Unload the mobility device from the lift platform.

WARNING! Do not attempt to manually pull the lift platform down from the stowed position. Doing so will result in product damage and will void the prod- uct warranty.

4.Raise the lift platform for storage, noting that it will automatically fold into a stowed position.

MANUAL LIFT SYSTEM OPERATION

The lift system is equipped with a manual crank that serves as backup in the event of a power failure. Using the supplied tool, rotate the manual crank (located on top of the motor housing) clockwise or counterclockwise to move the platform up or down. See figure 19.

Figure 18. Power Chair Hold-down Bar

MANUAL CRANK

MOTOR

HOUSING

Figure 19. Manual Crank Operation

Outlander Series www.pridemobility.com 17