4 Scheduled
Maintenance
Maintaining Print Quality
To maintain good print quality, clean the printer according to the schedules and information listed in this chapter.
1.Do a General Cleaning. (See page 77.)
2.Clean the main charger, precharger, and transfer charger. For cleaning instructions, see page 85 for the main charger, and page 89 for the precharger and transfer charger.
3.If print quality problems occur, clean the following areas (see page 68 for tool part numbers):
a.Clean the drum with the drum freshener (only when smears appear on print samples due to the drum).
b.Clean the LED array and the SELFOC®lens (LED print head) with the Toraysee™ cloth.
c.Clean the fuser cover glass with a razor blade or the cover glass scraper.
If the print quality is still poor after cleaning the printer, the chargers may need to be replaced. Contact your authorized service representative for further assistance.
NOTE: For replacement intervals, see the maintenance schedules that begin on page 70.
67
