Proxim AP-4000 manual Rogue Scan

Advanced Configuration				AP-4000 Series User Guide
Alarms
	Syslog Message Name	Priority	Severity	Description
	CLI Configuration File Execution	4	Minor	There is an error in execution of the CLI
	Errors			configuration file. The message specifies the
				filename, line number, and error reason.
	SSH Initialization Failure	3	Major	One of the following failures occurs:
				Keys not present
				Keys cannot be generated
				Internal error (no available resources)
	SSH Key Generation Successful	6	Informational	SSH Key generation is successful.
	Wireless Service Shutdown	6	Informational	Wireless service is shutdown.
	Wireless Service Resume	6	Informational	Wireless service resumes.
	First MIC Report Attack	4	Minor	First MIC report attack is detected.
	Second MIC Report Attack	4	Minor	Second MIC report attack is detected.
	MIC Attack from Wireless Station	4	Minor	A MIC attack is detected from a wireless station.
	SNTP Time Retrieval Failure	4	Minor	SNTP Client in the AP fails to retrieve time
				information from the configured SNTP servers.
				Also included in message: IP Address of SNTP
				server.
	SNTP Time Sync-Up Failure	4	Minor	SNTP Client in the AP fails to synchronize the time
				with the SNTP server it was communicating with.
				Also included in message: IP Address of SNTP
				server.
	Incompatible license file	3	Major	Incompatible license file is stored in flash memory
				during initialization or license file download. Also
				included in message: incompatibility reason.
	Invalid license file	3	Major	Invalid license file is stored in flash memory during
				initialization or license file download. The license
				file is found to be invalid if the signed checksum
				verification fails.
	Mesh Connection Failure	3	Major	AP fails to connect with an uplink Mesh AP or
				Mesh portal. Also included in message: uplink
				Mesh portal/AP MAC address, Mesh SSID, and
				reason for connection failure.
	Link Integrity Failure	3	Major	Link integrity feature determines that link integrity
				target is down. Also included in message: Link
				Integrity target IP address.
	Topology Change	6	Informational	Mesh AP changes its uplink mesh connection. Also
				included in message: uplink Mesh AP/portal MAC
				address and Mesh SSID.

Rogue Scan

The Rogue Scan feature provides an additional security level for wireless LAN deployments. Rogue Scan uses the selected wireless interface(s) for scanning its coverage area for Access Points and clients.

A centralized Network Manager receives MAC address information from the AP on all wireless clients detected by the AP. The Network Manager then queries all wired switches to find out the inbound switch/port of these wireless clients. If the switch/port does not have a valid Access Point connected to it as per a pre-configured database, the Network Manager proceeds to block that switch/port and prevent the Rogue AP from connecting to the wired network.

93