Chapter 7 Managing Libraries
Auditing a Library
•Delete ALL drives associated with the library as described in Deleting a Tape Drive on page 195.
1From the SNSM home page, choose Library > Config Library from the Admin menu. The Configure Library screen (figure 126 on page 182) appears.
2Select from the Select Library list the library you want to delete, and then click Delete. A message window prompts you to confirm that you want to delete the library.
3Click OK to proceed. The Delete Library Status screen appears.
4After the status screen indicates that the library has been deleted, click Close.
Auditing a Library
Use this procedure to audit a library. An audit is a physical check of each library component to verify its integrity and make sure the database and library are synchronized. Quantum recommends that you audit the library after each restore.
1From the SNSM home page, choose Library > Audit Library from the Admin menu. The Audit Library screen appears.
StorNext User’s Guide | 184 |
