|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Connections to other equipment |
|
|
|
| (continued) |
| ||||||||||||||
To connect the TV/DVD to a camcorder, or a TV Game
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent
Rear of the unit
To VIDEO/AUDIO IN
or
Video/Audio cord
(not supplied)
To Video/Audio OUT
To connect the TV/DVD to a PC (Personal Computer)
Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC/HDMI AUDIO IN jack of the TV/DVD.You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV/DVD can operate as the computer monitor.
Rear of the unit
VGA cable (not supplied)
To PC MONITOR IN
To PC/HDMI AUDIO IN | To HDMI IN |
|
HDMI cable (not supplied)
Audio cord (not supplied)
Monitor Display modes
MODE Resolution Refresh rate
VGA | 640x480 | 60/ 72/ 75 Hz |
VGA | 720x400 | 70Hz |
SVGA | 800x600 | 56/ 60/ 72/ 75 Hz |
XGA | 1024x768 | 60/ 70/ 75 Hz |
WXGA | 1280x768 | 60Hz |
WXGA | 1280x720 | 60Hz |
WXGA | 1360x768 | 60Hz |
To return to normal mode Press INPUT SELECT again.
NOTE:
• The
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the
52D0201A_EN.indd 39
39
6/12/09 1:44:45 PM
