CONNECTIONS & SETUP
SET THE SAT/CABLE CHANNEL (AUTO TUNING)
The next step lets you set the SAT/CABLE channel. When you set the SAT/CABLE channel, you’re telling the monitor what channel to tune to when you press the DIRECTV button on the remote.
Indicate which input you used to connect a satellite receiver, a cable box or a digital set top converter. If you don’t have one of these components connected to the monitor, skip this step.
1.From the CHANNEL menu (shown below), select Auto Tuning.
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Go Back
2.From the AUTO TUNING menu (shown below), select Set SAT/CABLE Channel.
AUTO TUNING
1 Set VCR1 Channel...
2 Set VCR2 Channel...
3 Set DVD Channel...
4 Set SAT/CABLE Channel...
0 Go Back
3.From the SET SAT/CABLE Channel menu (shown below), point to the choice in the that matches the way you have your satellite receiver or cable box connected to the monitor.
SET SAT/CABLE CHANNEL
1 Not connected 2 Channel 2
3 Channel 3
4 Channel 4
5 Video 1 Input
6 Video 2 Input
7 Video 3 Input
8 (S)VGA 2 Input
4.Press OK to select it.
24
