Names and Functions of Control Panel, Check Modes key | Savin 2045

Names and Functions of Control Panel

Names and Functions of Control Panel

This illustration shows the control panel when options are installed.

1

ZHSS010E

1.{User Tools/Counter} key

Use to change default or operation pa- rameters according to the operating con- ditions.

2.Display

Shows the operation status and messag- es.

3.{Check Modes} key

Press to check the current settings.

4.{Clear Modes} key

Press to clear the current settings.

5.{Energy Saver} key

Press this key for about one second to be- gin warm-up.

Pressing this key again while in warm-up mode cancels warm-up.

Note

❒This key is inactive while scanning or setting scanner defaults.

6.Main power indicator and power indicator

The main power indicator lights up when the main power switch is set to on. The power indicator lights up when the ma- chine is on.

Important

❒Do not turn off the main power while the power indicator is lit or blinking. Doing so may cause a failure of the hard disk.

7.Operation switch

Press this switch to turn the machine on. The power indicator lights up. To turn the machine off, press this switch again.

Note

❒This key is inactive while setting scan- ner defaults.

8.Indicators

Show errors and machine status. d: Add Staple indicator

D: Add Toner indicator

B: Add Paper indicator

L: Service Call indicator

M: Open Cover indicator

x: Misfeed indicator

Reference

For more information, see General Settings Guide.

7

Image 13

Savin 2045 appendix Names and Functions of Control Panel, User Tools/Counter key, Check Modes key, Clear Modes key

Contents

Printer/Scanner Unit Type Page Manuals for This Machine Manuals for ScanRouter V2 Lite Manuals for DeskTopBinder V2 LiteOther manuals Table of Contents Specifications TroubleshootingPreparation for Delivering Delivering Stored Scan Data Symbols How to Read This ManualPreparation Limitation Names of Major Options Mail OutlineThis machine Client computer This machine Client computer Network Delivery ScannerDelivery server Document Server Network Twain Scanner User Tools/Counter key Names and Functions of Control PanelCheck Modes key Clear Modes key Display Contents Using e-mail Using as a network delivery scanner Network Scanner Default Settings Initial Scanner SetupScanner Features Preparations for Use as a Network Scanner Resolution Basic SettingsScan Type Image Density Press Scanner Features Setting procedurePress the User Tools/Counter key Enter the name, and then press OK Enter the scan size area with the number keys Selecting a custom size Deleting programmed scan settings Scanner SettingsSend/Store Connection Timeout Press the User Tools/Counter key. B Press Scanner Features Compression Black & White Update Delivery Server Destination ListCompression Gray Scale Destination List Priority Original Setting Job Reset Time in Adding OriginalMail Information Language Original Orientation Priority Mixed Original Sizes Priority Switch to BatchPrint & Delete Scanner Journal Select Title Change the setting Subject SettingsPress the item to be set Enter the subject string Select the subject you want to de- lete Deleting programmed subject settings Auto Run Program Installing Software Installation Sequence Select a setup language, and then click OK Software for Using a Network Twain ScannerClick Twain Driver Select a language, and then click OK Software for Using the Network Delivery Scanner Function Click DeskTopBinder V2 Lite DeskTopBinder V2 Lite List of Files Software Supplied on CD-ROMType2045 Twain Driver File storage folder DeskTopBinder V2 Lite ScanRouter V2 Lite Software installed with DeskTopBinder V2 Lite Software installed with ScanRouter V2 Lite Placing Originals Specifying Original Orientation and Setting Originals That the top edge touches the rear Exposure glass Originals that can and cannot be Placed in the ADF Placing in the Auto Document Feeder Another way is to place the top edges of the originals first For a Network Delivery Scanner and E-mail Original Orientation and Scan Area Orientation selection One-sided original/Two-sided original selectionSADF/Batch selection Mixed size selection Press OK Scanning Originals in Several TimesOpen the Scanner Properties dia- log box Make settings for delivering, sending by e-mail, or storing Make settings for scanning area and original orientationPlace the originals Preparation for Sending by E-mail Sending Stored Scan Data by E-mail Registration No Screen ConfigurationManual Input Attach Senders Name Attach Sub- ject File Type Press Switch Destination List Press E-mail Procedure for Sending E-mailPress the Scanner key Make sure that no previous set- tings remain Using a short ID number to select a destination When selecting a destination from the listManual entry of an e-mail address Press Registration No Press Srch.by Dest.Name/Index Searching for a destination to selectSrch.by Dest.Name/Index and Search by E-mail Press Search Making the settings individually Recalling stored scan settingsChecking selected destinations Using a short ID number to specify a sender name When selecting a sender from the listPress Attach Senders Name Select the sender Enter part of the sender name Searching for a sender to selectPress OK Select the sender Manual entry of a subject When selecting a subject from the listPress Attach Subject Press Attach Subject Press Manual Input Press the Start key Simultaneous Storage Sending of E-mailPress Store File Press OK twice Press the Start key Checking the Status of E-mail CancelItems that can be checked Sending Stored Scan Data by E-mail Preparation for Delivering Using the Network Delivery Scanner Function Network Delivery Scanner Icon Switch Destination List/SearchAttach Senders Name Attach Sub- ject Press Switch Destination List Press Delivery Server Delivery ProcedureDelivering Stored Scan Data When selecting a destination from the list Press Search Press Search by User Name Manual entry of a destinationEnter the destination Enter part of the destination name Press OK To enter more destinations, re- peat steps a to C Checking selected destinations Using a short ID number to specify a sender name Soft keyboard is displayed for entering a sender name Simultaneous Delivery and Storage Network Delivery Scanner Checking the Status of DeliveryScreen Using the Document Server Function Storing Data Storage Procedure Press OK Make the settings for storing scanned data files Making settings individuallyPress Store Only Specify file information Specifying a user name Specifying file informationPress Store File Press File Information Press User Name Press Password Specifying a passwordSpecifying a file name Press File Name Press Select Stored File Press Manage/Delete File Viewing a List of Stored Files Viewing the List When using the Document Server function only Send When displaying information of a selected stored file Connected device name Folder contents displayUser name All Users Searching by user name Searching for FilesSearching by file name Enter the file name to search for Select a file to be delivered or sent Delivering or Sending Stored FilesTo select multiple files, repeat step B Deleting Files Managing Stored FilesSelect the file to be deleted Changing the user name Changing File InformationPress Delete File Press Change User Name Press Change Password Changing the passwordChanging the file name Press Change File Name Preparation for Using the Network Twain Scanner Using the Network Twain Scanner Function Scanning Originals Click Preview When you want to configure the scanning areaClick Close Click Scan Functions of the Twain Driver Scanning Mode RegistrationAutomatic Tilt Correction Printing to the Image When Gray Scale is selected as the Scan Type Relationship between Resolution and Data Size For Use as Network Twain Scanner Relationship between Resolution and Data Size TIFF/JPEG Tiff When Scanning Is Not Performed as Expected TroubleshootingWhen the Delivery Function Does Not Work Message Causes and Solutions When an Error Message Appears on the Control Panel Size B4S JIS A4R A4S Message Causes and Solutions Message Causes and Solutions Troubleshooting Cess Mask settings in User Tools When an Error Message Appears on the Computer Ministrator Tions Specifications Index Start key GB GB Means Power ON. c means Stand by GB GB B548-8700