Operation

I Press the {Proof} key and check the image density and the image position on the proof print.

1

Note

If the image position is not cor-

rect, adjust it using the [Image =] key. See p.24 “Adjusting the Position of Printed Images”.

If the image density is slightly

dark or light, adjust the image density using the {W}{V} keys. See p.25 “Adjusting the Image Density of Prints”.

J Enter the number of prints re- quired with the number keys.

K Press the {Print} key.

Note

To stop the machine during a

multi - print run, press the

{Clear/Stop} key.

To return the machine to the ini-

tial condition after printing,

press the {Clear Modes/Energy Saver} key.

Removing Prints

A Pull the front paper delivery side plate down towards you to open.

Note

To change the number entered, press the {Clear/Stop} key and enter the new number.

Note

You cannot open the rear paper delivery side plate.

20

Page 39
Image 39
Savin 3460DNP operating instructions Removing Prints