COPIER EXTERIOR
Operation Panel
Copy Exit key
Switches the direction in which copies are delivered.
→See page 10.
Edge indicators
Displays the margin settings.
Paper Cut Length indicator
Displays the paper cut length.
Cut Select key
Switches the paper cut type.
→See page 14.
Paper Select key
Selects the paper feed type.
→See page 22.
Paper Size key
Switches the paper cut size in the paper feed direction.
→See page 22.
Fusing Temperature key
Switches the fusing unit temperature according to the paper type.
→See page 7.
Roll Edge Cut key
Cuts the paper edge when the roll paper is replaced.
→See page 41.
When you press this key
during copying, the paper Auto Image Density key is cut.
Adjusts the copy density automatically.
→ See page 9.
Indicator Panel
Clear Modes/Energy
Saver key
Cancels all of the current settings. When you hold down this key for three seconds or more, the copier enters the Energy Saver mode allowing you to conserve power. When you press the key again, the Energy Saver mode is cleared.
Program key
Allows you to store various copy settings.
→See page 24.
Edge Margin key
Press to set a margin.
→See page 12.
+/- keys
Specifies a numeric value.
Sample Copy key
Copies an original in 245 mm, 9.6" from its leading edge. → See page 21.
Partial Copy key
Copies a specified part of an original.
→See page 19.
Enter key
/keys
Press to specify the number of copies.
Copy Counter
Displays the number of copies made.
Clear/Stop key
Darker/Lighter keys
Press to adjust the copy density.
→See page 9.
Emergency Stop key
Press to stop copying while the paper or original is being fed.
2
