Scag Power Equipment SCR manual Tracking Adjustment Steering Handle Adjustment, Drive linkage

R

Section 6

Figure 6-5 Drive linkage

SCR 2K TAD

Tracking Adjustment Steering Handle Adjustment

-IMPORTANT-

Before proceeding with this adjustment, be sure that the tire pressure is correct, that the caster wheels turn freely, and that the transmission drive belt tension spring is not broken.

The mower tracking should be adjusted if the machine does not travel in a straight line during forward travel. Preform the neutral adjustment before proceeding with the tracking adjustment.

1.If the machine pulls to the right, loosen the jam nuts on the right control rod and turn the rod slightly clockwise, tighten the jam nuts and retest.

2.If the machine pulls to the left, loosen the jam nuts on the left control rod and turn the rod slightly clockwise, tighten the jam nuts and retest.

The steering handles should be positioned in line with each other for easy one-handed control. The handles can then be adjusted forward or backwards to accommodate the operator.

Gap

Keep Handles

Aligned

Adjustment Bolt

SCR 2K SHA

Figure 6-6 Steering Handle Adjustment

24