..............................HIll=
SERVICE AND ADJUSTMENTS
i | = | Nil ,il, l,,=,lH= | = = | = = = |
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
o Place motion control lever in neutral (N) position.
o Depress clutch/brake pedal fully and set parking brake, = Place attachment clutch in "DISENGAGED" position.
=Turn ignition key "OFF" and remove key,
°Make sure the blades and all moving parts have completely stopped.
. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plugo
m
TO REMOVE MOWER (See Fig. 20)
=Place attachment dutch in "DISENGAGED" position.
oTurn height adjustment knob to lowest setting,
•Lower mower to its lowest position°
oRemove retainer spring holding
°Remove retainer springs from suspension arms at deck and disengage arms from deck,
°Raise attachment lift to its highest position
. Remove two retainer springs from each front link and remove links.,
°Slide mower forward and remove belt from electric clutch pulley.
•Slide mower out from under right side of tractor.
IMPORTANT: tFAN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINKS,
TO INSTALL MOWER
Follow procedure described in "INSTALL MOWER AND DRIVE BELT" in the Assembly section of this manual
TO LEVEL MOWER HOUSING
Adjust the mower while tractor is parked on level ground or
driveway Make sure tires are properly inflated (See "PRODUCT SPECIFICATIONS" on page 3 of this manual)., Iftires are over or underinflated, you will not properly adiust your mower.
ADJUSTMENT
NUTSLIFTFRONT
LINKSSUSPENSION
SUSPENSION
ARMS
BRACKET
CHASSIS
FRONT
SUSPENSION
BRACKET
RETAINER
SPRINGS
RETAINER
SPRING
FRONT MOWER BRACKET
BARRETAINER
SPRINGS
FIG. 20
21
