Servis-Rhino P/N 00763618C manual Swivel and Lift ARM Attachment

ASSEMBLY

SWIVEL AND LIFT ARM ATTACHMENT

Attach the Swivel Assembly on the Lift Arms using chrome plated Attaching Pin (1) retain with Roll Pin (2). Figure 3. Remove the Attaching Pin (3) from the Main Frame. Attach the Right and Left Lift Arm (Note Jack storage mount on Left Lift Arm only) to the Main Frame with attaching Pin (3). Secure with 1/2" x 1-1/2" bolt, (5) flatwasher, and locknut. Attach the Toggle Links (6) to the right and left Lift Arms with attachin Pin (4). Secure with 1/2" x 1-1/2" bolt, flatwasher, and locknuts. Figure 4.

1 2

INSIDE HOLE

OUTER HOLE

NOTE: If Mower is a 14-1/2 ft. or 16-1/2 ft. unit, the Swivel is installed in the outer hole of the Lift Arm. If the Mower is

a13-1/2 ft. or 15-1/2 ft. unit, the Swivel is installed on the inside hole of the Lift Arm.

FIGURE3

6

4

Jack

Storage

6 3

4

5

Jack

Storage

left wing

		3
		5
	FIGURE4	right wing
Turf Flex 08/01	Assembly Section 3-3	R 11-20-95

© 2004 Alamo Group Inc.

ASSEMBLY