User instructions, End Of Cycle | Smeg STA643PQ specification

Image 17

Smeg STA643PQ manual User instructions, End Of Cycle, Removing The Dishes

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. Safety and operating instructions Safety instructionsUSES OTHER THAN THOSE DESCRIBED ABOVE NEVER BE REMOVED THIS DISHWASHER MUST BE USED BY ADULTS APPLIANCE AQUASTOP MODELS 2.1 Water supply connection Installation instructions2. Installation and hook-up DRAIN CONNECTION CONNECTING TO THE WATER SUPPLY IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD 2.2 Electrical connection and precautionsNEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD FOR GREAT BRITAIN ONLY Fuse replacement 3. Description of the controls User instructionsSELECTED PROGRAM INDICATOR LIGHTS 3.1 Upper panel “3/1” OPTION BUTTON 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION LIGHT HALF LOAD BUTTON The RAPID CYCLE 6, “3/1” 8, HALF LOAD WASH 10 and DELAYED START Very dirty pans POWERDURATION MINUTES Before starting a washing program make sure that 3.2 Washing programsThe correct amount of detergent has been added to the dispenser RAPID CYCLES available in all programs except the soak program DELAYED START available in all programs except the soak program SELECTING HALF LOAD WASHavailable in all programs except the soak program CHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT REMOVING THE DISHES END OF CYCLE 4.1 Using the water softening system 4. Operating instructions ADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensers ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTING During the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENT User instructions MAKE SURE that the items being washed are dishwasher-safe 4.3 General warnings and recommendationsCorrect loading of the dishes helps ensure optimal washing results Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe LOADING THE LOWER BASKET 4.4 Using the basketsLOWER BASKET CUTLERY BASKET LOADING THE UPPER BASKET UPPER BASKET Depending on the models, the basket may be equipped with some or all of the following accessories Version B ADJUSTING THE UPPER BASKET User instructions CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS 5.1 General warnings and recommendations GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tap If the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap again If there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check thatIf the dishes show signs of streaking, staining, etc., check that FAULT 6. TroubleshootingSafety level E1 E2 E3 E4 E5 E6 Turbine flow-regulator malfunction E7 E8 E9Alternate washing system malfunction Water intake system malfunction Electrical characteristics TECHNICAL DATAWidth Height depending on models Capacity Water supply pressure