Sprint Nextel 550 manual To insert the PCS Connection Card into a Pocket PC, Card. do not Force

ActiveSync should launch automatically when the host and Handheld/ Pocket PC are connected.

Note: If you are unable to establish a connection, launch ActiveSync from the Start menu and use the online help in ActiveSync.

2.If you are prompted to indicate whether you want to set up a partnership, click Yes or No and click Next. (For the purpose of downloading the PCS Connection Manager Software, it does not matter whether you have a partnership.) You should then be prompted that there is software to download.

3.Click Yes to start the download. When complete, you will be prompted to check your mobile device screen to see if additional steps are required.

4.Click OK.

5.Reset your Handheld/Pocket PC by inserting the stylus into the reset button. (The reset button is usually a circular indentation that may be on the keyboard of the Handheld PC or the bottom of the Pocket PC. Consult the documentation that came with your PC if you do not know how to reset the device.)

On completion of this step, the PCS Connection Manager Software and the PCS Connection Card driver are installed and you can proceed to activate your card. See “Activating Your PCS Connection Card” on page 33.

InsertingandRemovingthePCSConnectionCard

Inserting the PCS Connection Card

To insert the PCS Connection Card into a Pocket PC:

1.If the PCMCIA jacket accessory is not already attached, slide the Pocket PC bottom first into the jacket. It should click into place.

2.Attach the antenna to the circular copper connector on the end of the

card. DO NOT FORCE.

3.With the Sprint label facing towards the front of the Pocket PC, insert the network card into the slot at the top of the jacket.

Section 2: Installing the PCS Connection Card

32 2B: Installation on Handheld and Pocket PCs