TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL
1)Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Example: CH3)
2)Select the channel to record from your Cable Converter Box or Satellite Box.
FRONT A/V INPUT
When using an external input signal (another VCR, video game or video camera), connect the player’s audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the CHAN- NEL K or L button until “AUX” appears on the screen.
NOTE: “AUX” is found below the | AUX |
lowest memorized channel. |
|
(Example: CH2) |
|
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the polarity
3)Replace the cover.
SET UP FOR USE
SELECTING THE LANGUAGE
1Plug in the TV/VCR power cord
Plug the TV/VCR power cord into a standard AC outlet.
NOTE:
• If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.
Make sure ...
•Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.
2 Select “LANGUAGE” | TIMER PROGRAMMING | |
| – M E N U – | |
Press the MENU button on the | PICTURE CONTROL | |
SETTING CLOCK | ||
remote control. | CHANNEL SET UP | |
| USER’S SET UP | |
Press the PLAY/K or STOP/L but- | B LANGUAGE [ENGLISH] | |
ZERO RETURN | ||
| CAPTION [OFF] | |
ton to point to “LANGUAGE”. | TIME SERARCH | |
INDEX SEARCH | ||
|
3Select “ENGLISH”, “ESPAÑOL” or
“FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or “FRANÇAIS”= French using the F.FWD/ B or REW/s button.
4Exit the Language mode
Press the MENU button on the remote control to return to TV mode.
NOTE: If for some reason the menu is in Spanish or French, press the MENU button on the remote con- trol, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then press the F.FWD/B button, then press the MENU button on the remote control.
CLOCK SET UP
(AUTO / MANUAL)
The TV/VCR clock must be set correctly before timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR. Then, set to [ON] the auto clock setting which will periodi- cally correct the setting if necessary.
NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only.
MANUAL CLOCK SETTING
Make sure ...
•The TV/VCR is turned on.
- 10 - | EN |
