Tekkeon MP3450 R2 manual Select/Connect the Adapter Plug, For assistance

Select/Connect the Adapter Plug

1.Select the adapter plug that fits securely into the power jack on your portable device.

2.Locate the polarity symbol on your device in the area around the power connector jack:

Center Positive Center Negative

WARNING: myPower ALL Plus supports Center Positive polarity only. If your device has a Center Negative polarity, do not power the device with myPower ALL Plus; contact support@tekkeon.com

for assistance.

3.Connect the adapter plug to the power output cord (but not the device).

If you are using a UA-xxx adapter (rather than PA-xxx), you must insert the PA-L34 (“Z”) adapter that came with your myPower ALL Plus between the adapter cord and UA-xxx adapter as shown.

NOTE: If you change the adapter plug while the power adapter cord is connected to myPower ALL Plus, the voltage setting will reset to the lowest voltage, which is the default voltage setting.

PA-L34 (“Z”)

Adapter for

myPower ALL Plus

8