Toshiba e-STUDIO211c/311c manual General Copying Procedures, Place paper in the drawers

1. GENERAL COPYING PROCEDURES

After setting (confirming) paper in the drawers, place the originals. When the START key is pressed with any settings unchanged, copies are made in the initial (default) settings (*1). You can make copies as desired by setting different copy modes.

2The initial (default) settings of the copier at the time of installa- tion are as shown on the right.

*1 The copy modes that are automatically set when the power is turned on, when the energy-saving mode is cleared or

when the FUNCTION CLEAR key is pressed on the con- trol panel are called the initial (default) settings.

*2 This is displayed when the reversing automatic document feeder (optional) is installed.

Copying Procedure

1Place paper in the drawer(s).

- Acceptable copy paper Page 2-4

When the desired paper is not set in any of the drawers or the large-capacity feeder (optional):

-Setting the drawer Page 2-6

-Bypass copying Page 6-5

2Place the originals.

-Acceptable originals Page 2-9

-When placing an original on the glass Page 2-10

-When using the reversing automatic document feeder (op- tional) Page 2-11

3 Select the copy modes ( in the illustration on the page on the right).

-Use the colour mode selection key, the touch panel and the digital keys.

-Any copy modes cannot be changed after the START key is pressed (including the case when originals are divided into multiple sets when fed).

-Selecting multiple copy modes may be restricted depending on their combination. Page 11-11, 11-12

4Press the START key ( in the illustration on the page on the right).

-When the reversing automatic document feeder is used and the continuous feed mode is selected ( Page 6-2), copying begins.

Initial (default) settings
Full-colour mode
Reproduction ratio	........... 100%
Copy quantity	1
Automatic paper selection
1-sided copies from 1-sided originals
Manual image density
Text/photo mode (original image type)
Sheet bypass	plain paper
Non-sort Non-staple mode
Continuous original feed mode (*2)

2-2HOW TO MAKE COPIES