5 – Instalación del Gabinete (continuación)

1

5-3 Colocación

Use las ruedas para mover el sistema UPS por cortas distancias sobre una superficie nivelada, suave y estable. No intente usar las ruedas para mover el sistema UPS por largas distancias. El sistema UPS deberá moverse cerca del sitio de ubicación final dentro de su contenedor de embarque antes de desempacarlo del contenedor de embarque. Use un dispositivo mecánico de la suficiente capacidad para mover el contenedor de embarque. Advertencia: El sistema

UPS puede volcarse si es movido en un área inestable. Extreme precauciones cuando mueva el sistema UPS. Empuje el sistema UPS del frente o de atrás, y no de los lados.

Posicione el sistema en un área estructuralmente sólida con un piso nivelado que sea capaz de soporta el peso del sistema UPS los gabinetes de baterías externas y otros equipos que vayan a ser instalados cerca. La instalación también deberá contar con un circuito CA dedicado que sea compatible con los requerimientos de entrada del sistema UPS. (Vea la Sección 11 - Especificaciones para más información acerca de los requerimientos de entrada y los requerimientos de rssitencia/carga del piso). El sistema UPS debe instalarse en un entorno limpio, seguro con una humedad relativa menor al 90% (sin condensación). Opere el sistema

UPS a temperaturas interiores entre 17° C y 29° C (62° F y 84° F). Prevenga daños al cableado utilizando conduits protectores adecuados. A fin de mantener un adecuado flujo de aire y acceso para servicio, debe mantener el siguiente espacio libre:

Por lo menos 100 cm de espacio libre al frente del sistema UPS.

Por lo menos 50 cm de espacio libre atrás del sistema UPS.

Por lo menos 50 cm de espacio libre arriba del sistema UPS.

Advertencia: El ventilador de enfriamiento circula el aire del frente hacia atrás. No utilice ningún aire acondicionado o ventilador que dirija el aire directamente hacia la parte de atrás del sistema UPS.

Después de mover el sistema UPS a su ubicación final, asegure las ruedas y use los niveladores para estabilizar el gabinete. Asegúrese que los cuatro niveladores hacen un contacto firme con el suelo.

Para casos de emergencia, instale cerca del sistema UPS un extintor certificado para incendios de equipos eléctricos (Certificado Clase C o su equivalente exacto con un agente extintor no conductivo).

2

3

1

4

50 cm

5

50 cm

6

100 cm

2

7

8

 

9

 

10

B

A

3

11

 

12

13

4

57

200803004 93-2793 SU80k manual 4C.indd S57

6/16/2008 1:44:05 PM

Page 57
Image 57
Tripp Lite SU80K owner manual Instalación del Gabinete continuación, Colocación

SU80K specifications

The Tripp Lite SU80K is a robust and reliable uninterruptible power supply (UPS) solution, designed to provide essential backup power to critical equipment in various environments such as data centers, telecommunications, and industrial settings. This high-capacity UPS offers 80 kVA of power, ensuring optimal protection for vital systems against power interruptions and fluctuations.

One of the main features of the SU80K is its advanced double-conversion technology, which provides clean and consistent power by converting incoming AC power to DC and then back to AC. This process not only isolates connected equipment from raw utility power, but it also ensures that sensitive electronic devices maintain a steady voltage and frequency, ultimately enhancing their performance and lifespan.

In terms of efficiency, the SU80K is equipped with an energy-efficient design that maximizes operation while minimizing energy consumption. The unit operates with an efficiency rating of up to 97% in online mode, which contributes to reduced operational costs over time and is especially beneficial for large-scale deployments.

Another notable characteristic of the SU80K is its modular design, which allows for flexibility and scalability. Users can add additional battery packs to extend runtime, enabling the UPS to adapt to changing power needs without requiring complete system replacement. This feature is particularly advantageous for growing businesses that need to expand their backup power capabilities progressively.

The SU80K also includes advanced monitoring and management options, with an optional network management card that enables remote monitoring via a web interface. This capability provides real-time data on the UPS’s status, battery health, and load levels, allowing IT administrators to make informed decisions to maintain system availability.

Additionally, the UPS features multiple communication ports, including RS-232 and USB interfaces, ensuring compatibility with various devices and ease of integration into existing systems. It also supports SNMP protocols, allowing for seamless integration with network management systems.

Overall, the Tripp Lite SU80K combines high performance, advanced features, and user-friendly management options to create an ideal solution for businesses that require reliable and efficient power protection for their critical equipment. With its strong build quality and commitment to performance, the SU80K stands out as a versatile choice for ensuring business continuity in the face of power disturbances.