Setting System Attenuation (Trunked Systems Only)

Menu

Program System

Select the system

Set Attenuator

This setting controls whether the attenuator will be on or off for the current system. Select your setting then press E.

Off - the attenuator is off.

On - system frequencies are attenuated by about 18 dB.

Notes:

Turn on this setting if you are near strong signal sources. Attenuation can help reduce interference and desensitization that strong signals create.

You can also turn this setting on or off by holding

on a trunked system, then pressing Func + E.

Deleting Systems

Menu

Program System

Select the system

Delete System

The scanner prompts you to confirm deletion. To confirm, press E. To cancel, press .

Notes:

Deleted systems cannot be restored. You must re-enter them.

You cannot restore preloaded systems.

Copying Systems

To copy a system including all settings, groups, and channels:

Programming/Editing Optional Settings

83

Page 85
Image 85
Uniden UBC396T Setting System Attenuation Trunked Systems Only, Deleting Systems, Copying Systems, Delete System