13
BASIC SETUP
STEP 9:
Once you have found the right code, save the code number by pressing the SAVE button that appears on the LCD screen. The LCD screen will blink “SAVED” two times, signaling that the code number has been successfully saved.
SAVE
BUTTON
STEP 10:
Exit SETUP mode by pressing the MAIN button two times. When the LCD screen displays MAIN, you are back in normal operating mode.
NOW, PROGRAM THE REST OF YOUR COMPONENTS BY REPEATING STEPS 1 THROUGH 9. IN MOST SYSTEMS, YOU CAN FINISH BASIC SETUP IN JUST A FEW MINUTES AND PUT ALL YOUR OLD REMOTES AWAY.
IF YOU ARE STILL MISSING COM- MANDS TO CONTROL ANY OF YOUR COMPONENTS, USE THE LEARNING METHOD ON PAGE 15.
MAIN
BUTTON
14
