Item | Description |
|
|
Assign LAN/Internet | Define the range(s) of IP addresses that define the LAN or |
Address Range(s) | the Internet domain. Any IP addresses outside the range are |
| assumed to be from the domain you did not select. Check one |
| option and, if necessary, use the text box to enter the range(s) |
| separated by a comma, a semicolon, or a new line. For details, |
| see ETV |
| • All Users, Servers, and VBricks are in the LAN Domain |
| (default). |
| • All Users, Servers, and VBricks are in the Internet |
| Domain. |
| • Specify LAN Address Range(s); assume users/servers/ |
| VBricks outside this range(s) are in the Internet domain. |
| • Specify Internet Address Range(s); assume users/servers/ |
| VBricks outside this range(s) are in the LAN domain. |
| • Always use TCP protocol (HTTP Tunneling/RTSP |
| Interleaving) for |
| Use only with |
| and |
| always use HTTP tunneling or RTSP interleaving using |
| the HTTP Tunneling Port defined for the server (see Add |
| VOD Server on page 31). |
| Note: Standard VBrick IP Receivers do not support |
| HTTP tunneling and will not play |
| option is selected. |
|
|
Assign Multicast Address | Defines the current multicast IP address range and port |
Range | range. The default multicast IP range is 225.1.1.0– |
| 239.128.255.255. The default port range is |
|
|
Assign VOD Polling | Not generally changed. Defines the interval at which the |
Interval | Portal Server polls the VOD server(s) for new content |
| (default 120 minutes). This is only used to poll for content |
| added to the VOD from an interface other than ETV Portal |
| Server. When adding a server, use Sync Now to sync the |
| program listings on the client Browse Video Library page |
| with the content on the new server. |
| Use Hide content for VOD Servers experiencing connection |
| problems to prevent end users from seeing unavailable |
| content and to enable rollover to the Default Server |
| Address(es) specified on the Zones page (see Zones on |
| page 76 for more information). Default = checked. If this |
| option is unchecked, there will be no rollover to default |
| servers in the event of a server failure. |
|
|
24 | © 2009 VBrick Systems, Inc. |
