ViewSonic NMP-530 manual TWO Modes of Operation, Standalone

TWO MODES OF OPERATION

STANDALONE

Standalone setup allows the NMP-530to act as an independent network device to display content on a Plasma Display Panel (PDP) or a Liquid Crystal Display (LCD) for digital signage or narrowcasting applications. Content can come from either the remote server or local storage on the NMP-530.

HDMI Ethernet cable

NMP-530

Display – PDP or LCD	AC power	Server
	adapter

TAS MANAGED

You can purchase TAS separately through Tivella (www.tivella.com or a Tivella dealer/reseller). A TAS server should be used to configure and manage multiple NMP-530s remotely. TAS provides centralized scheduling of video content presentation on multiple NMP-530s, as well as management and seamless operation of a Cisco® ACNS Content Distribution Networking infrastructure if one is installed. This configuration greatly reduces maintenance overhead, when TAS and the NMP-530are connected to the network (LAN/WAN) with the TAS acting as a manager for multiple NMP-530s.

Network

TAS

E N G L I S H

ViewSonic NMP-530 3