www.vxitech.com
INPUT:RANGE
The input range command selects the input range of one or more channels. The input range may be either set for ±10 volts or ± 100 volts. It is important to note that the input offset is normalized to ± 10 volt range. The actual input offset in the 100 volt range is ten times the set value.
INPut:RANGe <range>,<channel_list> | Where <range> is 10 V 100 V. |
| Where <channel_list> is the standard |
| channel list format supporting channels 1 |
| through 16. |
|
|
EXAMPLES |
|
INPut:RANGe 100,(@1:16) | Sets the input range for Channels 1 through |
| 16 to 100 V. |
INPut:RANGe? 7 | Returns the input range for Channel 7 as |
100 | 100 V. |
INP:RANG 10,(@4:6) | Sets the input range for Channels 4 through |
| 6 to 10 V. |
INP:RANG? 5 | Returns the input range for Channel 5 as |
10 | 10 V. |
VM4016 Programming | 31 |
