Xantrex Technology RS400 manual Using the S400 Remote Switch, 2S400 Remote Switch

Using the S400 Remote Switch

	The S400 Remote Switch performs the same function as the On/Standby
	switch on the RS400.
Invert mode use	The S400 Remote Switch provides On/Standby control only when the
only	RS400 is operating in invert mode.
	To use the S400 Remote Switch, the On/Standby switch on the RS400
	must be turned to the On (	) position. See “Operating in Invert Mode” on
	page 2–5.
	Important: When shore power is present, the S400 Remote Switch will
	not change the operation of the inverter.
Purpose	The S400 Remote Switch provides remote control of the RS400 from a
	convenient location up to 25 feet (7.5 meters) away using the supplied
	telephone cable.
Cable length	You can use a longer cable up to a maximum recommended length of 50
	feet (15 meters). Xantrex recommends using a high quality 4-wire
	telephone cable wth 6-position, 4-contact connectors.

Inverter ON

Figure 2-2S400 Remote Switch

2–4 445-0167-01-01