Xerox Printer manual DOT Leader command, Gap, specified by Interword gap, DOT Leader Using Font

HOST FORMS DESCRIPTION LANGUAGE

Table 3-1.Determining interword

The interword	applied to the base		equals an
multiplier:	gap, specified by:	interword gap of:
INTERWORD .5	no SPACING operand	0.5 *	the width of
			ASCII code point
			X`20'
INTERWORD .5	COMPILE SPACING1	0.5 *	the EN space
INTERWORD 1.0	no SPACING operand	1.0 *	the width of
			ASCII code point
			X`20'
INTERWORD 1.0	COMPILE SPACING1	1.0 *	the EN space
(no INTERWORD	no SPACING operand	(1.0) *	the width of
command specified,			ASCII code point
defaults to 1.0)			X`20'
(no INTERWORD	COMPILE SPACING1	(1.0) *	the EN space
command specified,
defaults to 1.0)

1Valid for fully justifed text only

DOT LEADER command

Use the DOT LEADER command to define the character string you specify when you use DOT LEADER in the TEXT AT command. The text string portion of the TEXT AT command allows for DOT LEADER requests.

Figure 3±23 shows the command syntax flow.

Figure 3±23. DOT LEADER command syntax

								;
							'string'
		DOT	LEADER
				USING	FONT	n
Parameters			'string' specifies the type of dot leader you want to use. Strings
			cannot exceed 12 characters.
			USING FONT n specifies the font you want to use for the dot
			leader characters.
	Defaults		Single dots of the font currently in use, if you do not specify a
			font and you use DOT LEADER in the TEXT command.
	Examples		Long form:
			DOT LEADER USING FONT 1 '*';
			*****************************

3±32 HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS