Zebra Technologies ZT400 manual Calibration and Diagnostic Tools, Print Information

Printer Configuration and Adjustment

Adjust Printer Settings

71

Calibration and Diagnostic Tools

Table 2 • Calibration and Diagnostic Tools

Print Information

Print the specified information on one or more labels.

Accepted values:	• SETTINGS—prints the printer configuration
	label.
	• NETWORK—prints the settings for any print
	server that is installed.
	• FORMATS—prints the available formats stored
	in the printer’s RAM, Flash memory, or optional
	memory card.
	• IMAGES—prints the available images stored in
	the printer’s RAM, Flash memory, or optional
	memory card.
	• FONTS—prints the available fonts in the printer,
	including standard printer fonts plus any optional
	fonts. Fonts may be stored in RAM or Flash
	memory.
	• BARCODES—prints the available bar codes in
	the printer. Bar codes may be stored in RAM or
	Flash memory.
	• ALL—prints the previous six labels.
	• SENSOR PROFILE—shows the sensor settings
	compared to actual sensor readings. To interpret
	the results of the sensor profile, see Sensor Profile
	on page 170.
Related ZPL command(s):	Settings: ~WC
	Network: ~WL
	Sensor profile: ~JG
	Others: ^WD
SGD command used:	none
User menu item:	Settings: PRINT INFORMATION on page 97
	Network: PRINT INFORMATION on page 106
	Sensor profile: PRINT INFORMATION on page 113
Control panel key(s):	Settings and Network: Do one of the following:
	• Hold CANCEL during printer power-up.
	• Hold FEED + CANCEL for 2 seconds when
	the printer is in the Ready state.
	Sensor profile: Hold FEED + CANCEL during printer
	power-up.
Printer web page:	View and Modify Printer Settings >
	Print Listings on Label

4/8/14 ZT400 Series™ User Guide P1066582-002