Husqvarna C342B owner manual Cover Seal See Fig, No hardware required, Support Post See Fig

Page 8

ASSEMBLY

2

COVER SEAL (See Fig. 2)

No hardware required

1.Align mark on seal with mark at cover opening.

2.Work seal into opening so cover sits between flanges of seal.

ALIGNMENT

MARKS

 

COVER SEAL

 

FIG. 2

 

 

 

 

 

 

3

SUPPORT POST (See Fig. 3)

Use Hardware - - GROUP "B"

 

CAUTION: Container support is spring

 

 

loaded and locked to the cover. Handle

 

 

cover assembly carefully so as not to

 

 

unlatch the cover from the container

 

 

support.

 

1.Rotate cover assembly onto its side as shown.

2.Assemble support post to container support with the three (3) carriage bolts and locknuts. Tighten securely.

CARRIAGE

BOLTS

SUPPORT

POST

LOCKNUTS

FIG. 3

8

4

MOUNTING TO TRACTOR (See Fig. 4)

Use Hardware - - GROUP "C & D"

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting assembly to tractor.

1.Raise seat on tractor to allow assembly to be mounted.

2.With cover closed, lift assembly and place support post inside mounting bracket. Allow assembly to rest on lanced tabs of mounting bracket.

3.Line up holes in mounting bracket with holes in support post and insert bracket support pin. Secure with retainer spring.

4.Unlatch and open cover.

5.Secure cover assembly to support tube using short hex bolt, long hex bolt, and locknuts as shown. Tighten all hardware securely.

NOTE: Hardware securing support tube to drawbar must be tightened at this time.

6.Install the four (4) tubing end caps onto container support. Tap each end cap onto container support tubes to seat securely.

COVER ASSEMBLY

SHORT

LOCKNUTS

HEX BOLT

 

LONG

 

HEX BOLT

BRACKET

 

 

SUPPORT PIN

 

RETAINER

 

SPRING

END CAP

LOCKNUTS

SHORT

HEX BOLT

LONG

HEX BOLT

SUPPORT TUBE

SUPPORT POST

MOUNTING

BRACKET

LANCED TABS

FIG. 4

Image 8
Contents Model No. C342B Safety Rules Safe Operation Practices for Ride-On MowersTable of Contents BAG of Parts Contents BAG of Parts Contents Assembly Parts IdentificationSee Figs A, 1B & 1C Use Hardware - Group a Rear Mounting BracketSupport Tube Cover Seal See Fig No hardware requiredSupport Post See Fig Use Hardware - Group BContainer Assembly See Fig Container Mounting See FigLower Chute See Figs a & 7B Use Hardware - Group E Chute Latch Assembly See Fig Use Hardware - Group F & GUpper Chute See Figs a & 9B Level Mower Deck No hardware requiredOperation Tips for Improved Bagging OperationCustomer Responsibilities Blade CareSee Template PreparationDrill Support Tube Mounting Holes in Drawbar Drill TWO 7/16 Holes Page Page 4647 KEY Part Description

C342B specifications

The Husqvarna C342B is a robust and efficient battery-powered brush cutter, designed to cater to the needs of both professional landscapers and homeowners. With its impressive performance and innovative features, this tool allows users to tackle a variety of trimming and clearing tasks with ease, freeing them from the limitations of traditional gas-powered equipment.

One of the standout characteristics of the C342B is its powerful brushless motor. This technology not only delivers high torque for demanding applications but also ensures an extended runtime and minimal maintenance needs compared to conventional gas engines. With no emissions produced during operation, the device is also environmentally friendly, making it ideal for residential areas and noise-sensitive environments.

The C342B features a lightweight and ergonomic design, ensuring user comfort during extended periods of use. The adjustable handle allows for a customizable grip, which is essential for achieving optimal control and reducing fatigue. Moreover, the bike handle configuration offers stability and ease of maneuvering, thus enhancing the overall user experience.

An important aspect of the C342B is its compatibility with Husqvarna's efficient battery system. The device can be powered by either the high-capacity 36V battery or a range of compatible batteries, allowing users to select the battery that best suits their needs. This modularity not only extends the runtime but also provides flexibility with other Husqvarna tools, creating a versatile landscaping toolkit.

The C342B is equipped with an efficient cutting system, including a 2-line trimmer head that is compatible with different line diameters for various cutting applications. This means users can easily switch to thicker lines when tackling overgrown areas or use finer lines for more delicate trimming tasks. The tool's smart design also allows for quick line replacement, minimizing downtime and improving efficiency.

Safety features are integrated throughout the C342B, with a protective guard ensuring user safety from debris and a quick-stop function that allows the motor to shut off immediately when releasing the trigger. This attention to safety makes the C342B an ideal choice for both novices and seasoned professionals alike.

In summary, the Husqvarna C342B stands out as a versatile, efficient, and environmentally friendly brush cutter. Its blend of cutting-edge technology, user-centric design, and powerful performance ensures it meets the demands of various landscaping tasks while prioritizing comfort and safety. Whether trimming grass, clearing brush, or maintaining garden edges, the C342B proves to be a reliable tool for achieving exceptional results.