Jensen VM9324 manual Direct Tuning, Using Preset Stations, Storing a Station

VM9324

Direct Tuning

To enter a radio station directly, touch the button or press the GOTO button (21) on the remote control to display the direct entry menu.

FM . MHz

1 2 3

Exit

4 5 6

7 8 9

0C

Enter the desired radio station using the on-screen number pad. Press the arrow (enter) button to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear.

Using Preset Stations

Eighteen numbered preset buttons store and recall stations for the AM and FM band. All eighteen stored stations (P1-P18) for the current band appear on the screen for immediate recall.

Storing a Station

1.Select a band (if needed), then select a station.

2.Touch the on-screen MEM button (24) on page 2/2 to open the preset screen.

Preset:P

1 2 3

Exit

4 5 6

7 8 9

0C

3.Touch to enter the preset number in which you would like to store the current station (or touch Exit to cancel and close the menu). The preset number and station appears highlighted in the list.

27