Husqvarna 142 instruction manual Following items are not covered by this warranty

Page 16

care label. The fit of the protective apparel/boot is not covered under warranty.

30 Day Warranty: Replacement parts, ac- cessories including bars and chains, tools and display items.

SECTION 2: HUSQVARNA’S OBLIGA- TIONS UNDER THE WARRANTY

Husqvarna will repair or replace defective com- ponents without charge for parts or labor if a component fails because of a defect in material or workmanship during the warranty period.

SECTION 3: ITEMS NOT COVERED BY THIS WARRANTY

The following items are not covered by this warranty:

(1)Normal customer maintenance items which become worn through normal reg- ular use, including, but not limited to, belts, blades, blade adapters, bulbs, fil- ters, guide bars, lubricants, rewind springs, saw chains, spark plugs, starter ropes and tines;

(2)Natural discoloration of material due to ul- traviolet light.

(3)Engine and drive systems not manufac- tured by Husqvarna; these items are cov- ered by the respective manufacturer’s warranty as provided in writing with the product information supplied at the time of purchase; all claims must be sent to the appropriate manufacturer.

(4)Lawn and garden attachments are cov- ered by a third party which gives a war- ranty; all claims for warranty should be sent to the manufacturer; and

(5)Emission control system components necessary to comply with CARB--TIER II and EPA regulations which are manufac- tured by third party engine manufacturer.

SECTION 4: EXCEPTIONS AND LIM- ITATIONS

This warranty shall be inapplicable to de- fects resulting from the following:

(1)Accident, abuse, misuse, negligence and neglect, including stale fuel, dirt, abra- sives, moisture, rust, corrosion, or any adverse reaction due to incorrect storage or use habits.

(2)Failure to operate or maintain the unit in ac- cordance with the instruction manual or in- struction sheet furnished by Husqvarna.

(3)Alterations or modifications that change the intended use of the product or affects the product’s performance, operation, safety, or durability, or causes the product to fail to comply with any applicable laws.

(4)Additional damage to parts or compo-

nents due to continued use occurring af- ter any of the above.

REPAIR OR REPLACEMENT AS PRO- VIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PUR- CHASER. HUSQVARNA SHALL NOT BE

LIABLE FOR ANY INCIDENTAL OR CON- SEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WAR- RANTY ON THESE PRODUCTS EXCEPT TO THE EXTENT PROHIBITED BY APPLI- CABLE LAW. ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURA- TION TO THE WARRANTY PERIOD AS DEFINED IN THE LIMITED WARRANTY STATEMENT. HUSQVARNA RESERVES THE RIGHT TO CHANGE OR IMPROVE THE DESIGN OF THE PRODUCT WITH- OUT NOTICE, AND DOES NOT ASSUME OBLIGATION TO UPDATE PREVIOUSLY MANUFACTURED PRODUCTS.

Some states do not allow the exclusion of inci- dental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

SECTION 5: CUSTOMER RE- SPONSIBILITIES

The product must exhibit reasonable care, maintenance, operation, storage and general upkeep as written in the maintenance section of the Owner’s/Operator’s manual. Should an operational problem or failure occur, the prod- uct should not be used, but delivered as is to an authorized Husqvarna dealer for evaluation. Proof of purchase, as explained in Section 6, rests solely with the customer.

SECTION 6: PROCEDURE TO OB- TAIN WARRANTY CONSIDERATION

It is the Owner’s and Dealer’s responsibility to make certain that the Warranty Registra- tion Card is properly filled out and mailed to Husqvarna Forest & Garden Company. This card should be mailed within ten (10) days from the date of purchase in order to confirm the warranty and to facilitate post--sale ser- vice.

Proof of purchase must be presented to the authorized Husqvarna dealer in order to ob- tain warranty service. This proof must in- clude date purchased, model number, serial number, and complete name and address of the selling dealer.

To obtain the benefit of this warranty, the product believed to be defective must be de- livered to an authorized Husqvarna dealer in a timely manner, no later than thirty (30) days from date of the operational problem or fail- ure. The product must be delivered at the owner’s expense. Pick--up and delivery charges are not covered by this warranty. An authorized Husqvarna dealer can be nor- mally located through the “Yellow Pages” of the local telephone directory or by calling 1--800--HUSKY62 for a dealer in your area.

7349 Statesville Road CHARLOTTE, NC 28269

16

Image 16
Contents 137 Identification of Symbols Identification What is WHAT?Chain Brake Assembly Safety Rules Plan AheadOperate Your SAW Safely Maintain Your SAW in Good Working OrderReduce the Chance of Kickback KickbackMaintain Control Kickback Safety Features Chain Brake and CKA AngleElbow locked Thumb on underside of handlebar If your hand slips off the front handlebarComputed kickback angle CKA Table Assembly Attaching the BAR & Chain If notChain Tension Checking the tensionAdjusting the tension Fueling & LubricationFueling Engine BAR and Chain LubricationOperating Your Unit Important points to rememberStarting a Warm Engine Difficult Starting or starting a flooded engineCutting Methods Braking function control Caution The chain brake must beInertia activating function control Important PointsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Types of Cutting Used for BuckingBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingService and Adjustments Cleaning the air filterCarburetor Adjustments AIR FilterBAR Maintenance Chain SharpeningIgnition Timing Spark PlugLoad Adjustment Engine Limited Warranty StatementEmpty fuel tank and refill with Following items are not covered by this warranty Natural discoloration of material due to ul- traviolet lightLigations The U.S. Environmental Protec Center or call Husqvarna atIntermediate 125 hours Extended 300 hours
Related manuals
Manual 4 pages 16 Kb

142 specifications

The Husqvarna 142 is a powerful and versatile chainsaw designed for homeowners and outdoor enthusiasts who require a reliable tool for various cutting tasks. This model combines performance, efficiency, and ease of use, making it an excellent choice for those who need to tackle firewood cutting, tree pruning, or other general yard work.

One of the main features of the Husqvarna 142 is its lightweight design. Weighing only around 10.8 lbs, it is easy to maneuver, ensuring less fatigue during extended use. This makes it particularly appealing for those who may not have the physical strength required for heavier models. Despite its light weight, the Husqvarna 142 does not compromise on power. It is equipped with a 2.0 horsepower, 40cc two-stroke engine, providing ample cutting capability for most household tasks.

The chainsaw comes with Husqvarna’s unique Air Injection technology, which is designed to enhance engine performance by utilizing centrifugal force to separate larger dust and debris particles before they reach the air filter. This system helps to keep the air filter clean for longer periods, reducing maintenance needs and ensuring efficient operation over time. Additionally, the engine features a fuel-saving X-Torq system, which reduces fuel consumption and emissions without sacrificing performance. This makes the Husqvarna 142 not only cost-effective but also environmentally friendly.

Comfort and safety are prioritized in the design of the Husqvarna 142. The chainsaw is equipped with an anti-vibration system that minimizes user fatigue and discomfort, allowing for more extended periods of use. The protective handguard helps prevent injuries, and the chain brake feature stops the chain quickly in the event of kickback, ensuring safe operation.

Another noteworthy characteristic of the Husqvarna 142 is its easy-to-use tensioning system for adjusting the chain. The side-mounted chain tensioner allows for quick and tool-free adjustments, ensuring the chain remains properly tensioned for optimal performance.

In summary, the Husqvarna 142 is a well-rounded chainsaw that offers a combination of power, efficiency, and user-friendly features. Its lightweight design, advanced technologies, and safety features make it an excellent choice for homeowners looking to manage their outdoor spaces efficiently and effectively. Whether you are cutting firewood, trimming branches, or clearing debris, the Husqvarna 142 delivers reliable performance to meet your needs.