Husqvarna FS 524, FS 513, FS 520 manuel dutilisation Do not

Page 12

SAFETY INSTRUCTIONS

SAFETY FIRST!

WARNINGS

DO’s AND DO NOT’s

WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.

DO NOT

DO NOT operate this machine unless you have read and understood this operator’s manual. DO NOT operate this machine without the blade guard, or other protective guards in place. DO NOT stand behind or in front of the blade path while the engine is running.

DO NOT leave this machine unattended while the engine is running. DO NOT work on this machine while the engine is running.

DO NOT operate this machine when you are tired, fatigued or under the influence of drugs or alcohol. DO NOT use a wet blade without adequate water supply to the blade.

DO NOT exceed maximum blade speed shown for each blade size. Excessive speed could result in blade breakage.

DO NOT operate the machine if you are uncertain of how to run the machine. DO NOT use damaged equipment or blades.

DO NOT touch or try to stop a moving blade with your hand. DO NOT cock, jam, wedge or twist the blade in a cut.

DO NOT transport a cutting machine with the blade mounted on the machine. DO NOT use a blade that has been dropped or damaged.

DO NOT use carbide tipped blades.

DO NOT touch a dry cutting diamond blade immediately after use. These blades require several minutes to cool after each cut.

DO NOT use damaged or worn blade flanges.

DO NOT allow other persons to be near the machine when starting, refueling, or when the machine is in operation.

DO NOT operate this machine in an enclosed area. Breathing Poison Exhaust Gas could result in death. DO NOT operate this machine in the vicinity of anything that is flammable. Sparks could cause a fire or an

explosion.

DO NOT allow blade exposure from the guard to be more than 180 degrees. DO NOT operate this machine with the belt guards or blade guard removed.

DO NOT operate this machine unless you are specifically trained for its operation.

DO NOT use a blade that has been over heated (Core has a bluish color).

DO NOT jam material into the blade. DO NOT grind on the side of the blade.

DO NOT tow this machine behind a vehicle.

DO NOT operate this machine with the any guards or shields removed.

DO NOT cut deeper than 1” per pass with a dry blade. Step cut to achieve deeper cuts. DO NOT operate this machine while under the influence of drugs or alcohol.

*****************

This saw was designed for certain applications only. DO NOT modify this saw or use for any application other than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until you have written Husqvarna Construction Products and we have advised you.

Husqvarna Construction Products North America 17400 West 119th Street, Olathe, Kansas 66061 USA

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents FS 513, FS 520, FS Page Contents and Introduction Symbols and Decals Symbols and Decals Symbols and Decals Symbols and Decals 543 04 57-88SOUND Level 108dBA Safety Instructions General useCalifornia Prop 65 Warning Poison Exhaust GAS General InformationSafety Instructions Safety First DO’s and do NOT’sDo not Page Parts Identification What is What Water Tank / Lifting Point Support Holds Water TankDD. Engine Start Switch AAA BBB Assembly Install Front Pointer a Blade Guard Front DRe-Position Blade Depth Control Handle EE Install Water Tank P if equipped Torque Lifting Eye NUT to 83 N-m 61 lb-ft mini MumAssembly Filling Water Tank Operation Before OperationRe-Locating the Blade Guard C If Required Parking Brake Engage See Diagram Transporting & Lifting MachineLifting machine equipped with Water Tank Parking MachineFS 520, FS Parking Brake Dis-engage See Dia gramGasoline Engine Models All ModelsFitting the Diamond Blade H Starting FS Starting and cutting with machineExtended Periods of Non-Operation Two Weeks or Greater FS 520 / FS 524 Remove Fuel in EngineMaintenance & Lubrication FS 520 / FSReplacing Engine Air Filter S Engine Oil Checking Engine Oil FS 520 / FSBattery Maintenance FS 520 / FS Changing Engine OilGovernor Speed Model Blade Shaft EngineService of Hydrostatic Transmission TT Mainte Hydrostatic TransmissionBelt and Sheave Wear Hydrostatic Transmission Belt WW Belt TensionTrouble Shooting Guide Diamond Blade Trouble Shooting Problem Cause & ActionEngine Will Not Start Cause Action Wiring Diagram FS QTY Description Wiring Diagram FS SWITCH, ENG. OIL LEVEL, Honda Wiring Diagram FS Technical Data Sound LevelModel Maximum Vibration Aeq in m/s Maximum Exposure Time Blade Size Maximum Blade Cutting Depth ModelModel Nominal Maximum Mass-kg lbs Accessories Conformity Certificates Husqvarna Construction Products North AmericaContact Information Construction Products, North America Corporate Office542 20

FS 520, FS 513, FS 524 specifications

Husqvarna, a renowned name in outdoor power equipment, offers a robust range of walk-behind floor saws designed for professionals and contractors. Among their offerings, the FS 524, FS 513, and FS 520 stand out as exceptional choices, each possessing unique features and technologies that cater to a variety of concrete cutting needs.

The Husqvarna FS 524 is designed for medium-sized jobs and is known for its efficiency and user-friendliness. This model features a powerful engine that delivers consistent performance while minimizing fuel consumption. The FS 524 is equipped with a hand-lever locking for cutting depth, ensuring precision during operation. Its unique design allows for easy transportation and setup, making it ideal for contractors who move between job sites frequently. Moreover, its foldable handlebars enhance compact storage, further improving mobility.

Next in line, the FS 513 is recognized for its compact design and versatility. Engineered for homeowners and small businesses, the FS 513 features a lightweight yet durable construction that doesn't sacrifice performance. With an adjustable depth control and quick-release blade guard, operators can easily change blades and adjust depths without extensive downtime. The robust engine ensures ample power while the vibration-dampening system provides a comfortable experience, reducing operator fatigue over long periods of use.

The FS 520 is a yet more powerful option, suited for larger projects requiring enhanced cutting depth and efficiency. It features the advanced SmartGuard technology, which enhances safety by automatically adjusting the cutting depth based on the blade utilized. The high-performance engine partnered with premium blades allows for deep cuts and efficient material removal, ideal for roadwork and large-scale repairs. The FS 520 also includes a user-friendly control panel that provides easy access to essential functions, ensuring an optimal cutting experience.

All three models utilize Husqvarna’s proprietary technologies, including their state-of-the-art blade cooling system that reduces wear and increases blade life. The ergonomic designs across the FS series help improve operator comfort and control, making these saws suitable for extended periods of use. In summary, the Husqvarna FS 524, FS 513, and FS 520 offer unmatched reliability, performance, and advanced features that empower professionals to tackle concrete cutting projects with confidence and precision.
Top Page Image Contents