Hustler Turf Z Shibaura Diesel, ATZ, Super Z Safety Precautions, Safety and Instruction Decals

Page 6

SAFETY PRECAUTIONS

This safety alert symbol is used to call attention to a message intended to provide a reasonable degree of PERSONAL SAFETY for operators and other persons during the normal operation and servicing of this equipment.

DANGER – denotes immediate hazards which WILL result in severe personal injury or death.

WARNING - denotes a hazard or unsafe practice which COULD result in severe personal injury or death.

This manual uses two other words to highlight information. IMPORTANT calls attention to special mechanical information and NOTE: emphasizes general information worthy of special attention.

All operators and mechanics should read this manual and be instructed about safe operating and maintenance procedures. If the operators or mechanics cannot read or understand English, it is the owner’s responsibility to explain this material to them.

Improper use or maintenance by the operator or owner can result in injury. To reduce the potential for injury, comply with these safety instructions and always pay attention to the safety alert symbol, which means DANGER or WARNING - “personal safety instructions.” Failure to comply with the instructions may result in personal injury or death.

Incorrect usage of this machine may result in severe injury. Personnel operating and maintaining it should be trained in the proper use and should read the manuals completely and thoroughly before attempting to set-up, operate, adjust, or service this machine.

The Quick Reference Decals are designed to give the operator brief information needed in the daily operation of the machine. These decals are not intended to be used in place of this manual but instead are to be used as an extension of this manual. These decals should not be removed or obliterated. Replace these decals if they become unreadable.

It is the owner’s responsibility to make certain that the operators and mechanics read and understand this manual and the Quick Reference Decals before operating this machine. It is also the owner’s responsibility to make certain that the operators and mechanics are qualified and physically able individuals, properly trained in the operation of this equipment. All operators and mechanics must become familiar with the safe operation of its equipment, operator controls and safety signs before operating the equipment.

Never let children or untrained people operate or service the equipment. Local regulations may restrict the age of the operator.

The owner/user can prevent and is responsible for accidents or injuries occurring to themselves, other people or property.

The owner should also ensure that the operator/mechanic know that they are responsible for their own safety as well as the safety of other persons within the vicinity. Remember, the operator is responsible for accidents or hazards occurring to other people or their property.

Safety and Instruction Decals

Specific safety warning decals are located on the equipment near the immediate areas of potential hazards. These decals should not be removed or obliterated. Replace them if they become non-readable.

The following illustrations show the various decals that are located on the machine. A brief explanation, for those requiring one, is shown to help the operator understand the meanings of these decals.

Read Owner’s Manual and Quick Reference Decal before attempting to operate this machine.

Do not remove or modify stabilizer wheels or injury can result.

Never stop suddenly while backing down slopes. This action may result in a reaction of the tractor that can cause serious physical injury.

Keep shields or covers in place while machine is in operation.

Keep hands away from rotating pulleys and belts.

Whirling blades! Keep hands and feet away.

Beware of thrown objects.

Do not smoke while refueling.

Do not fill tank with engine running, or while the engine is hot.

Allow engine to cool before storing machine inside a building.

Store away from open flame or spark if there is fuel in tank.

Clean up any gasoline spills.

Do not refuel while in enclosed trailer or other enclosed areas

Never operate the mower deck with side deflector damaged, altered, removed or in raised position, except when the entire grass catcher attachment or mulching system is being used.

Hot surface!

601656_0308

5

Image 6
Contents Page General Information 6016560308 What is Covered by this Warranty Limitation of Remedies Safety Precautions Safety and Instruction DecalsPart Number 600899 Part Number 601635Slope Guide 6016560308 Safe Operating Practices Using a rampOperation OperationChildren Do not operate on slopes greater than 15 degreesControl Panels Control PanelKohler EFI Units only Controls Engine gasoline starting Safety start interlock systemAmbient Preheating time Temperature Engine diesel startingMoving tractor with stalled engine Roll Over Protective StructureTorque values are given below Ft-lbs. Nm Mounting Bolt Hustler ATZ shown Driving the tractorHustler Z/Super Z shown Rops post 500-13 x 1.750 bolt 625-11 x 2.00 boltFront of Tractor Faces this Direction Operating suggestionsDeck cutting height adjustment Right control leverMower deck operation Anti-scalp wheels BAC-VACTMMountingRear Mount Legs Front Maintenance & Adjustments Electrical system Hustler Z Shibaura Diesel shown Amp fuse Housing BatteryLubrication Hydraulic systemRight tank Position Left tank Fuel systemEngine oil and filter Fuel shutoff PositionEngine air filter Recommended service procedurePre-cleaner Canister Safety filter Priming bulbCooling system liquid cooled units General engine maintenanceMower blade maintenance BeltsControl lever adjustment Mower blade removalUpper control lever Cap screw Lower control Lever Hustler Z/Super Z/Hustler ATZ Maintenance Schedule Hustler Z Shibaura Diesel Maintenance ScheduleHustler Z/Super Z Maintenance Locator Chart Hustler Z 26hp KawasakiHustler Z Shibaura Diesel Rear discharge deck 60 XR7 deck Viewed from bottom of tractor Troubleshooting Symptoms Probable Causes Suggested Remedies6016560308 Storage Product Literature6016560308 Index

Z, ATZ, Z Shibaura Diesel, Super Z specifications

The Hustler Turf Super Z, powered by the advanced Shibaura Diesel engine, is a high-performance mower designed for serious landscapers and lawn care professionals. The Super Z series stands out for its unmatched speed, efficiency, and durability, making it ideal for tackling large properties and commercial landscaping jobs.

One of the main features of the Super Z is its innovative design, which combines a powerful diesel engine with an ergonomic chassis. The Shibaura Diesel engine is renowned for its reliability and fuel efficiency, providing ample torque to power through tough grass and uneven terrain without compromising performance. This robust engine not only enhances the mower’s productivity but also ensures a longer lifespan.

The Super Z boasts a cutting width of up to 72 inches, allowing users to cover large areas in a fraction of the time compared to traditional mowers. Its patented Easy-Flo deck design guarantees a superior cut quality, resulting in a professional finish on every lawn. The mower's adjustable cutting heights cater to various grass types and user preferences, while the high blade tip speed ensures a clean, precise cut with minimal clumping.

Technologically, the Hustler Turf Super Z features the industry-leading Smart Ride suspension system, which significantly improves operator comfort by absorbing bumps and vibrations during operation. This is particularly beneficial during long hours of mowing, reducing fatigue and enhancing overall productivity. The user-friendly controls provide intuitive handling, making it easy for operators to maneuver the mower around obstacles efficiently.

Durability is another hallmark of the Super Z series. Constructed from heavy-duty materials, the mower can withstand rigorous use in challenging environments. Additionally, the enhanced maintenance accessibility allows for quicker service and upkeep, minimizing downtime and ensuring the mower is always ready for work.

In summary, the Hustler Turf Super Z with Shibaura Diesel engine is engineered for those who demand precision, power, and efficiency in their mowing equipment. Its advanced features and technologies make it a top choice for professionals looking to deliver exceptional results while maximizing productivity in their lawn care operations. Whether tackling large estates or commercial landscapes, the Super Z is a reliable partner for any mowing challenge.