Installation, Using the Cosmetic Trim Ring

VM9020TS

INSTALLATION

This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialty shop for assistance on this type of installation.

1.Remove the existing factory radio from the dashboard or center console mounting. Save all hardware and brack- ets as they will be used to mount the new radio.

2.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

ISO INSTALLATION

CAUTION: Do not exceed M5 X 6 MM screw size. Longer screws may touch and damage components inside the chassis.

3.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections are secure and insulated with wire nuts or electrical tape. After completing the wiring connections, plug the ISO connectors into the mating sockets on the rear of the chassis. Turn the unit on to confirm operation (vehicle ignition switch must be “on”). If the unit does not operate, re-check all wiring until the problem is corrected.

4.Mount the new radio assembly to the dashboard or center console using the reverse procedure in step 1.

CAUTION: For proper operation of the CD player, the chassis must be mounted within 30° of horizontal. Make sure the unit is mounted within this limitation.

NOTE: It is the end-users responsibility to install and operate this unit in a manner in accordance with local, state and federal laws. The PARKING BRAKE wire MUST BE CONNECTED as directed in the manual.

CAUTION: Do not block the cooling fan exit. If blocked, the unit may overheat and become damaged.

Using the iAUX3 External AV Connector

The iAUX3 allows you to connect a variety of external devices, including a VCR, DVD player, portable MP3 player, etc., to your VM9020TS without removing the radio.

To install the iAUX3, connect it to the AUX-IN cables on the back of the VM9020TS (see “Wiring” on page 3), and then install the iAUX3 in a location convenient for plugging in auxiliary devices.

Using the Cosmetic Trim Ring

A trim ring is packaged with the VM9020TS for installation flexibility. The VM9020TS will fit into most import dashes with little or no modification to the dash board/cavity. Some US domestic vehicle dashes will accept a Double-DIN chassis, but there is usually a small gap between the radio and dash piece after installation is complete. In this case, use the trim ring to conceal any gaps that may be present.

Replacing the Fuse

When replacing the fuse, use a new 10A replacement fuse. Using a fuse with an improper rating could damage the unit and cause a fire.

VM9020TS specifications

The Jensen VM9020TS is a versatile multimedia receiver designed for car enthusiasts who demand high-quality audio and comprehensive features in their vehicles. This unit stands out due to its blend of advanced technology and user-friendly interfaces that cater to a variety of media sources and connectivity options.

One of the main features of the Jensen VM9020TS is its 6.2-inch touchscreen display, which provides an intuitive user experience with clear visuals and easy navigation. The display is equipped with a high-resolution screen that enhances visibility, making it convenient for drivers to access their favorite functions while on the road.

The VM9020TS integrates a built-in Bluetooth system that allows hands-free calling and wireless audio streaming. This technology ensures that drivers can maintain focus and adhere to safety regulations while enjoying their favorite playlists directly from their smartphones or tablets. The Bluetooth connectivity supports a wide array of devices, making it compatible with both Android and iOS platforms.

In terms of audio performance, the Jensen VM9020TS features a powerful built-in amplifier, delivering rich and dynamic sound quality. With support for various audio formats, including MP3, WMA, and WAV, users can enjoy their music without sacrificing clarity or depth. The unit is equipped with a customizable equalizer, allowing users to fine-tune their listening experience according to personal preferences.

Another notable characteristic of the Jensen VM9020TS is its compatibility with rearview cameras, enhancing safety during reverse maneuvers. The unit comes with a dedicated camera input, which provides a clear view of the area behind the vehicle, assisting drivers in avoiding obstacles and ensuring a smooth parking experience.

For those who enjoy traditional media, the VM9020TS also includes a CD/DVD player, expanding the variety of entertainment choices. Additionally, it features USB and auxiliary inputs, enabling easy connection of external devices. With these options, users can play their favorite playlists or podcasts directly from a flash drive or connect other audio sources seamlessly.

Overall, the Jensen VM9020TS is a robust multimedia receiver that combines modern technology with practical features. Its advanced audio capabilities, wireless connectivity, and compatibility with various media formats make it an excellent choice for those looking to upgrade their in-car entertainment system. With a focus on safety, ease of use, and high-quality sound, the VM9020TS caters to the needs of today's drivers while delivering an enjoyable driving experience.