KEY TO SYMBOLS
Symbols
WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator’s manual.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
• A protective helmet where there is a risk of falling objects
• Approved hearing protection
•Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and ricochets.
The operator of the machine must |
|
| |
ensure, while working, that no |
|
| |
persons or animals come closer than | 15 m | 15 m | |
15 metres. | |||
50FT | 50FT |
Machines fitted with saw blades or
grass blades can be thrown violently
to the side when the blade comes into contact with a fixed object.This is called blade thrust. The blade is capable of amputating an arm or leg.
Always keep people and animals at least 15 metres from the machine.
Always wear approved protective gloves.
Wear sturdy,
Decompression valve: The valve is to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine.
Air purge.
Ignition; choke: Set the choke control in the choke position.
Heated handles
Only use
Other symbols/decals on the machine refer to special certification requirements for certain markets.
Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always be used.
The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
2 – English