Husqvarna SC18/968999352, SC18/968981201 manual Features and Controls

Page 3

FEATURES AND CONTROLS

Oil used in the engine (gray cap) 1. Refer to your engine manual for oil type, viscosity, weight and capacity.

Oil used in the Clutch/Gear Box 1. Refer to your engine manual for oil type, viscosity, weight and capacity. Reducer (yellow cap)

Transmission grease used 1. You should not need to service the transmission. Call Tecumseh or your servicing dealer if needed.

2.Transmission is located directly behind the front axle underneath the engine.

3.There is no dipstick for transmission.

4.Tecumseh Bentonite Grease part #788067B or equivalent.

3

Image 3
Contents Manual no REV 12/01/05 Operators manualContents Features and Controls Do not Safety ProceduresOperating Instructions General InformationOperating on Hills Before YOU StartTransporting TWO Minute Warning Saftey and MaintenanceEngine Service and Warranty Preventative Maintenance ScheduleBlade Wear Service and MaintenanceCleaning and Washing Adjusting Chain TensionProblem ANSWER/COMMENT TroubleshootingImportant Engine must be off before checking Troubleshooting Pulley, Right Angle Drive Pulley with belt removed. Lock Sound and Vibration Statment This page left black intentionally