General Safety Precautions

Steps before using a new power cutter.

•Please read the operator’s manual carefully.

•Check the assembly and adjustment of the cutting blade. See the instructions under the heading Assembling the cutting blade.

•Start the engine and check the idling setting, see instructions under the heading Maintenance. When the carburettor is set correctly the cutting blade should be still while idling. Setting of the idle speed is described under the heading Fine adjustment of the idle speed T. Set the correct speed according to these instructions. Do not use the power cutter if the idle speed is not adjusted correctly!

•Let your Husqvarna dealer regularly check the power cutter and make essential adjustments and repairs.

WARNING! Under no circumstances may the

!design of the machine be modiﬁed without the permission of the manufacturer. Always use genuine accessories. Non-authorized modiﬁcations and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! Use of products which cut, grind,

!drill, sand or shape material can generate dust and vapors which may contain harmful chemicals. Know the nature of the material being worked on and wear appropriate dust mask or respirator protection.

WARNING! A power cutter is a dangerous

!tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator’s Manual.

WARNING! The ignition system of this

!machine produces an electromagnetic ﬁeld during operation. This ﬁeld may under some circumstances interfere with pacemakers.To reduce the risk of serious or fatal injury, we recommend persons with pacemakers to consult their physician and the pacemaker manufacturer before operating this machine.

Husqvarna Construction Products has a policy of continuous product development. Husqvarna reserves the right to modify the design and appearance of products without prior notice and without further obligation introduce design modiﬁcations.

All information and all data in the Operator’s Manual were applicable at the time the Operator’s Manual was sent to print.

Personal protective equipment

WARNING! You must use approved personal

!protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

•Protective helmet

•Hearing protection

•Protective goggles or a visor

•Breathing mask

•Heavy-duty, ﬁrm grip gloves.

•Tight-ﬁtting, heavy-duty and comfortable clothing that permits full freedom of movement.

•Use leg-guards recommended for the material to be cut.

•Boots with steel toe-caps and non-slip sole

•Always have a ﬁrst aid kit nearby.

English – 5