Starter, Changing a broken or worn starter cord

MAINTENANCE

Starter

WARNING! When the recoil spring is wound

!up in the starter housing it is under tension and can, if handled carelessly, pop out and cause personal injury.

Always be careful when changing the recoil spring or the starter cord. Always wear protective goggles.

Changing a broken or worn starter cord

•Loosen the screws that hold the starter against the crankcase and remove the starter.

•Pull out the cord approx. 30 cm and hook it into the notch in the rim of the pulley. Release the recoil spring by letting the pulley rotate slowly backwards.

•Undo the screw in the centre of the pulley and remove the pulley. Insert and fasten a new starter cord to the pulley. Wind approx. 3 turns of the starter cord onto the pulley.

Connect the pulley to the recoil spring so that the end of the spring engages in the pulley. Fit the screw in the centre of the pulley. Insert the starter cord through the hole in the starter housing and the starter handle. Make a secure knot in the end of the starter cord.

Tensioning the recoil spring

•Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

CAUTION! Check that the pulley can be turned at least a further 1/2 turn when the starter cord is pulled all the way out.

Changing a broken recoil spring

•Lift up the starter pulley. See instructions under the heading Changing a broken or worn starter cord. Remember that the recoil spring is coiled under tension in the starter housing.

•Loosen the bolts holding the spring cassette.

•Remove the recoil spring by tapping the starter, with the inside facing downwards, gently on a work bench. If the spring pops out during assembly, coil it up from the outside, working inwards.

•Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring.

Fitting the starter

•To ﬁt the starter, ﬁrst pull out the starter cord and place the starter in position against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

•Fit and tighten the screws that hold the starter.

18 – English

K950 specifications

The Husqvarna K950 is a robust and powerful concrete cutter designed particularly for professionals who demand high performance in heavy-duty tasks. Renowned for its precision and durability, the K950 has set a standard in the construction and demolition industries.

One of the standout features of the K950 is its engine. Powered by a reliable 2-stroke, air-cooled engine, it delivers impressive performance with a displacement of 93.6 cc. This engine provides the necessary torque and power for cutting through various materials including concrete, asphalt, and masonry effortlessly. A two-stage filtration system ensures the engine remains clean and operates efficiently, extending its service life and reducing maintenance demands.

A key technology integrated into the K950 is the SmartPower system. This innovation optimizes the engine’s power output while reducing fuel consumption and emissions, making it environmentally friendly without compromising on performance. The K950 also features a vibration dampening system connected to the handle, which significantly reduces operator fatigue during prolonged use. This ergonomic design enables greater control and comfort, enhancing safety and efficiency.

The adjustable blade guard allows for easy modifications to the cutting depth and angle, facilitating versatile usage in different applications. Operators can use blades ranging up to 14 inches in diameter, accommodating a variety of cutting requirements. This flexibility makes the K950 suitable for both small renovations and large construction projects.

The K950’s lightweight yet sturdy design increases its maneuverability on the job site. Weighing approximately 24.4 kg, it is easy to transport and handle while providing the robustness needed for rigorous cutting tasks. The easy-to-reach controls and simplified starting mechanism help ensure operational efficiency even in demanding environments.

In terms of maintenance, Husqvarna has designed the K950 for easy servicing. Its accessible components allow operators to perform routine checks and repairs with minimal downtime.

Overall, the Husqvarna K950 blends power, precision, and advanced technology, making it a top choice for professionals in the field looking for a reliable cutting tool to enhance their productivity and efficiency on any job site. Whether tackling concrete paving, road construction, or demolition tasks, the K950 stands out as a dependable and high-performing solution.