Husqvarna 326RJX-Series manual Fuel Handling, Gasoline, Two-stroke oil, Mixing

Page 15

FUEL HANDLING

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

Gasoline

CAUTION! Always use high grade unleaded oil mixed gasoline (minimum 87 RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter and it will no longer serve its purpose.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

•This engine is certified to operate on unleaded gasoline.

•The lowest recommended octane rating is 87. If you run the engine on lower octane rating than 87 so-called “knocking“ can occur. This leads to an increased engine temperature, which can result in a serious engine breakdown.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke oil, which is specially formulated for our two-stroke engines. Mixture 1:50 (2%).

•Never use two-stroke oil intended for water-cooled outboard engines, sometimes referred to as outboard oil.

•Never use oil intended for four-stroke engines.

Gasoline, litre

Two-stroke oil, litre

 

 

 

2% (1:50)

 

 

5

0,10

 

 

10

0,20

 

 

15

0,30

 

 

20

0,40

 

 

US gallon

US fl. oz.

 

 

1

2 1/2

 

 

2 1/2

6 1/2

 

 

5

12 7/8

 

 

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

•This engine is certified to operate on unleaded gasoline.

WARNING! The catalytic converter muffler

!gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 326RJX-series Symbols KEY to SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting equipmentNever use a machine that has a faulty muffler Safety Instructions Cutting equipment Sharpening grass cutters and grass bladesTrimmer head Transport and storage General safety precautionsFuel safety StartingBasic working techniques Basic safety rulesGrass clearing using a grass blade General working instructionsTrimming Grass trimming using a trimmer head and plastic bladesWhat is what on the trimmer? What is WHAT?Assembly Fitting the J-handleFitting blades and trimmer heads Fitting other guards and cutting attachments Two-stroke oil Fuel HandlingFuel GasolineFuelling Starting and Stopping Check before startingStarting and stopping Stopping Carburettor MaintenanceHigh speed jet H Fine adjustment of the idle speed TCorrectly adjusted carburettor MufflerAir filter Cleaning the air filterCooling system Spark plugMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page Trimmy H Click Trimmy Hit Pro S35 25 m T35 Page ´z+H¶5s¨ Page 1140275-95 ´z+H¶5s¨ ´z+H¶5s¨

326RJX-Series specifications

The Husqvarna 326RJX-Series is a versatile and robust line of trimmers designed for both professional landscapers and avid gardeners. Known for their durability and superior performance, these trimmers excel in various applications, from maintaining residential yards to handling large commercial landscaping tasks.

One of the standout features of the 326RJX-Series is its powerful yet efficient engine. Equipped with Husqvarna's X-Torq technology, these trimmers deliver high power output while significantly reducing fuel consumption and emissions. This makes them an environmentally friendly choice without sacrificing performance. The engines are designed to start easily, ensuring that users can quickly get to work without frustration.

The lightweight design of the 326RJX-Series enhances maneuverability, allowing operators to work for extended periods without excessive fatigue. This is particularly beneficial for professional users who require reliability and efficiency throughout their day. Additionally, the adjustable handle makes it easy to customize the ergonomics, providing users with a comfortable grip and control during operation.

Another notable characteristic of the 326RJX-Series is its range of cutting attachments. The trimmers are compatible with a variety of cutting heads, including nylon line and metal blades, making them suitable for tackling different types of vegetation. With a quick-release mechanism, users can effortlessly switch between attachments, enhancing versatility and efficiency in the field.

Husqvarna also places emphasis on safety and ease of use. The 326RJX-Series is equipped with features such as an effective air filter system that enhances engine longevity by protecting it from dust and debris. Furthermore, the trimmers come with a dual-line head that enables users to achieve a cleaner finish while minimizing the time spent on maintenance.

The built-in vibration dampening system reduces fatigue by minimizing vibration transfer to the user's hands, making prolonged use much more comfortable. This system exemplifies Husqvarna's commitment to user-friendly design and promotes a safer working environment.

In summary, the Husqvarna 326RJX-Series trimmers combine powerful performance with cutting-edge technologies, ensuring efficient and effective operation for a variety of tasks. With features designed for comfort, safety, and versatility, these trimmers stand out as a top choice for professionals and home enthusiasts alike. Whether tackling tough overgrowth or precision trimming, the 326RJX-Series consistently delivers exceptional results.
Top Page Image Contents