Husqvarna 343R, 345RX, 343F, 345FX, 345FXT manual Positioned, For example, the H-needle is a

Page 23

3

Fuel system

 

 

 

Remove the movement limiters from the

 

 

jet needles using flat nose pliers.

 

 

Unscrew the jet needles.

 

 

Do not lose the small washers (A)!

 

 

Lift off the plastic and rubber guides.

 

 

NOTE!

 

 

Note how the jets are

 

 

positioned.

 

 

(For example, the H-needle is a

 

 

little shorter than the L-needle).

 

Dismantle the main jet (A) and the plug

Press out the main jet (A) with a

 

(B).

suitable punch.

 

 

Remove the plug (B).

 

 

Carefully drill a small hole (Ø 2 mm) in

 

 

the plug and pry it up with a pointed

 

 

object.

Check valves and dampers for wear. Replace if required.

Remove the valves and dampers. If these components are worn, idling is disrupted.

Always replace the valves and dampers at the same time.

22

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 343R 345RX 343F 345FX 345FXT Workshop Manual Brushcutter, Trimmer Model 343R, 345RX, 343F, 345FX, 345FXT ContentsGeneral recommendations Starter ContentsDismantling 1StarterStarter AssemblyReplacing the drive dogs Electrical system 502 71 Electrical systemChecking the ignition spark Tip 502 50 Replacing the spark Plug cover502 54 Heated handles Drive dogsWiring diagram Electrical system Fuel system Air filter Fuel systemFuel filter Tank ventingDismantling Fuel pumpCarburettor Blending unit Carburettor’s designMetering unit Dismantling the carburettor Pump unitFuel system Little shorter than the L-needle PositionedFor example, the H-needle is a Assembling the carburettor Are not bent or pinched when H-needle is a little shorterThan the L-needle Check carefully that the fuel hosesFine adjustment Carburettor settingsBasic setting Idling speed T-screw Setting Recommended max. speed must not be exceededCorrectly adjusted carburettor Tachometer should always be used to find the optimalRotating Carburettor adjustment 345RX/FX Adjustment 345RX/FXAdjusting the L-needle Adjusting the H Needle ThrottleCheck for wear on pins a and B Tip Page Centrifugal clutch 502 21 Centrifugal clutchDo not lose the sleeve bearings found in the clutch shoes Centrifugal clutch502 11 Clutch drumChange the bearings in the clutch housing if necessary Page Angle gear Let the small circlip around the axle remain Angle gearInput axle with pinion must be dismantled first 503 97503 80 ShaftCylinder and piston Cylinder and piston Decompression valve Turn the valve the right way when fittingWhen the valve is fitted the small hole must face outwards Inlet manifold Cleaning, inspectionCause Action Analysis and actionsInsufficient lubrication Piston scoring caused by heavy carbon deposits Piston ring breakage Piston damage caused by a too high engine speedCause Foreign objectsDefect Action Service tipsWear tolerances Crankshaft and crankcase Crankshaft and crankcase 502 52 Crankshaft and crankcaseInspecting Crankshaft Assembly To ensure a proper seal Leakage testing CrankcasePress down the sealing plates as Far as possible between the bolts503 55 Husqvarna E-TechPage Tools List of tools 503 84 503 55 502 50 502 52503 97 502 50 505 38 503 80 502 50114 01 2003W24

343R, 345RX, 343F, 345FX, 345FXT specifications

The Husqvarna 343R, 345RX, 343F, 345FX, and 345FXT are designed for efficiency and performance in demanding outdoor tasks. Each model stands out with unique features and technologies tailored to meet various needs, from professional landscaping to residential gardening.

Starting with the Husqvarna 343R, this versatile trimmer is well-known for its lightweight design and powerful performance. It is equipped with a 34 cc engine that delivers a reliable power-to-weight ratio, making it ideal for extended periods of use without excessive fatigue. The 343R features a simple start system, ensuring an easy ignition, while its Tap 'n Go trimmer head permits effortless line feeding, enhancing productivity.

Moving on to the Husqvarna 345RX, this model is favored by professionals for its robust build and advanced technology. Powered by a 45.7 cc engine, it provides superior cutting power suited for heavy-duty tasks. The 345RX comes with an ergonomic handle and a comfortable harness that allows for better weight distribution, which reduces strain during long work sessions. Additionally, the machine's X-Torq engine technology reduces fuel consumption and emissions, making it an environmentally friendly option.

The Husqvarna 343F offers a modest yet efficient powerhouse with its 34 cc engine. It is user-friendly, making it an excellent choice for recreational users or those new to outdoor maintenance. This model features an adjustable handle to accommodate various cutting angles, enhancing versatility according to the user's preference.

Next is the Husqvarna 345FX, an exceptional tool for professional use, boasting a high-performing 45.7 cc engine. The 345FX incorporates advanced vibration dampening technology, resulting in reduced operator fatigue during lengthy operations. Its advanced cutting attachments provide versatility for tackling different vegetation types, enhancing user experience.

Finally, the Husqvarna 345FXT merges performance with functionality. Like the 345FX, it features a 45.7 cc engine with exceptional power, but comes with additional features such as an easy-to-adjust harness and advanced cutting heads. This model is particularly suited for demanding tasks, offering extended run time and increased efficiency.

In summary, Husqvarna’s 343R, 345RX, 343F, 345FX, and 345FXT trimmers are engineered with cutting-edge technologies. Each offers unique features that cater to the distinct needs of both casual users and professionals. These models ensure optimal performance, efficiency, and comfort, making them excellent choices for various outdoor maintenance tasks.
Top Page Image Contents